My EF3 Si ZC DOHC Turbo project
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
My EF3 Si ZC DOHC Turbo project
hey guys this is my project for the last 2 years and is getting painted tomorrow night in mettalic gold as close as possible to top secret gold .
what you's think ?
i know its not the US styling but here it goes off
ZC 1.6L Dohc motor
ceramic clutch
jamex springs
Huge 600x300x80 Front mount intercooler (core)
2" stainless steel intercooler plumbing
custom turbo manifold
VF10 Trubo
POD
Turbosmart BOV
Full Lem 4 Link Engine managment
oil filter breather
M&H bucket Seat
Strurt Brace
Cyber side skirts
Cyber rear bar
Veilside Front bumper
Painted in Top Secret Gold (look a like colour)
Gizzmo shift light
External ignition coil
Brembo disc's (front)
Metal king Pads
Autotecnica sterring wheel
sony cd player
sony 6x9's
Kenwood 1000watt Sub
Kenwood ps 100 AMP
kenwood 6" fronts
shaved antena
shaved boot lock
shaved boot wiper
shaved and chromed rocket cover
chromed intake manifold
2.5" exhaust straight through
2.5" Dump pipe
15" Enkei Wheels
here's my new windscreen banner in gold .
what you's think ?
i know its not the US styling but here it goes off
ZC 1.6L Dohc motor
ceramic clutch
jamex springs
Huge 600x300x80 Front mount intercooler (core)
2" stainless steel intercooler plumbing
custom turbo manifold
VF10 Trubo
POD
Turbosmart BOV
Full Lem 4 Link Engine managment
oil filter breather
M&H bucket Seat
Strurt Brace
Cyber side skirts
Cyber rear bar
Veilside Front bumper
Painted in Top Secret Gold (look a like colour)
Gizzmo shift light
External ignition coil
Brembo disc's (front)
Metal king Pads
Autotecnica sterring wheel
sony cd player
sony 6x9's
Kenwood 1000watt Sub
Kenwood ps 100 AMP
kenwood 6" fronts
shaved antena
shaved boot lock
shaved boot wiper
shaved and chromed rocket cover
chromed intake manifold
2.5" exhaust straight through
2.5" Dump pipe
15" Enkei Wheels
here's my new windscreen banner in gold .
#3
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
about halfway through your pics i said to myself "this guy must be from Australia/New Zealand". Your style over there is very distinctive.
The car is bad *** man...but the engine bay is a little goofy if you ask me. Paint is over EVERYTHING. Whats up with that?
The car is bad *** man...but the engine bay is a little goofy if you ask me. Paint is over EVERYTHING. Whats up with that?
#4
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: My EF3 Si ZC DOHC Turbo project (miketurbohonda)
yeah New Zealand
lol yeah sucks painting a engine with everything + motor still in it
lol yeah sucks painting a engine with everything + motor still in it
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2003
Location: Sin City, NV
Posts: 2,903
Likes: 0
Received 0 Likes
on
0 Posts
dayum.. i swear you guys get the biggest intercooler you can find and toss it on there. haha that sucka looks so intimidating i wouldnt even think of runnin ya. looks good.
#11
Junior Member
Join Date: Mar 2004
Location: Manheim, Pa, United States
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Re: My EF3 Si ZC DOHC Turbo project (miketurbohonda)
what kinda boost are you rinning to need an IC that HUGE, and i don't see any internal work on your list, did you do any?
#12
Re: My EF3 Si ZC DOHC Turbo project (mrtoastyjr)
that is one ginormous FMIC. it will take 5 years to fill that thing up with air. full spool around 13,765 rpm's. haha just joking. good luck man. i have a boosted DOHC ZC also, they are so much fun.
#13
Member
Join Date: Jun 2003
Location: Somewhere in the lower part of, MI, U.S.A
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
Re: My EF3 Si ZC DOHC Turbo project (99sonicbluegsr)
I'm not a big body kit fan but I've got to say you have one hell of a nice car on your hands man... good work
#15
Re: My EF3 Si ZC DOHC Turbo project (jnbhonda)
God damn that is one ugly ef.....BUT WHOA your motor is so sexy...so i gotta give you the I guess you gotta get to the middle of the caramel nugget to get the badassness....
#18
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2nd_Gen)
hey thanks guys
yeah paint on hoses i awsn't to worried about as i'm buying a heap of samco hosing and doind all hoses in it (blue)
that cover by power sterring resivar is just to hide some stuff .
the intercooler i was very very surprised as i lost NO boost at all and no lag at all
which i was amazed no lag nothing
running 8-14psi
got no figuers yet getting dyno on 16th september
no internal work but i've got a spare motor at work i'm gonna slow build up for when my civic dies
yeah paint on hoses i awsn't to worried about as i'm buying a heap of samco hosing and doind all hoses in it (blue)
that cover by power sterring resivar is just to hide some stuff .
the intercooler i was very very surprised as i lost NO boost at all and no lag at all
which i was amazed no lag nothing
running 8-14psi
got no figuers yet getting dyno on 16th september
no internal work but i've got a spare motor at work i'm gonna slow build up for when my civic dies
#19
car needs to be rebuilt, but by someone else with better taste, take that front bumper off and put stock back on, replace all your overpainted bs in the engine bay and take off all your decals and it might be ok..
#20
Honda-Tech Member
Join Date: Jul 2005
Location: NOR, NV, USA
Posts: 1,221
Likes: 0
Received 0 Likes
on
0 Posts
Re: My EF3 Si ZC DOHC Turbo project (douglaslovin)
you are my hero... I really do love you... how can I show you... you did what I wanted to do but never committed to and should have... I sold out went for more power with a b16 I'm sorry... I'm going to cry myself to sleep that is a beautiful car... thank you for that
#21
Junior Member
Join Date: Jun 2005
Location: South County, xxx
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM MonopolyMan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM MonopolyMan »</TD></TR><TR><TD CLASS="quote">car needs to be rebuilt, but by someone else with better taste, take that front bumper off and put stock back on, replace all your overpainted bs in the engine bay and take off all your decals and it might be ok..</TD></TR></TABLE>
Put the stock bumper back on heh? "Do you use 10mm sockets on 12mm nuts?" Obviously you do, knowing that you don't have the common sense of just looking at that Intercooler and knowing a stock bumper wont fit over it.
Put the stock bumper back on heh? "Do you use 10mm sockets on 12mm nuts?" Obviously you do, knowing that you don't have the common sense of just looking at that Intercooler and knowing a stock bumper wont fit over it.
#22
Re: (xagix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xagix »</TD></TR><TR><TD CLASS="quote">
Put the stock bumper back on heh? "Do you use 10mm sockets on 12mm nuts?" Obviously you do, knowing that you don't have the common sense of just looking at that Intercooler and knowing a stock bumper wont fit over it.
</TD></TR></TABLE>
and it would be to hard to modify the stock bumper to fit? oh wow, id rather have my car looking nice clean and stock then with a huge body kit that makes it look like I'm off of F&F and use naws y0.
take a look at his kit, he cut it to fit the intercooler anyway, why couldnt he do that to a stock one?
Put the stock bumper back on heh? "Do you use 10mm sockets on 12mm nuts?" Obviously you do, knowing that you don't have the common sense of just looking at that Intercooler and knowing a stock bumper wont fit over it.
</TD></TR></TABLE>
and it would be to hard to modify the stock bumper to fit? oh wow, id rather have my car looking nice clean and stock then with a huge body kit that makes it look like I'm off of F&F and use naws y0.
take a look at his kit, he cut it to fit the intercooler anyway, why couldnt he do that to a stock one?
#23
Honda-Tech Member
Join Date: Oct 2003
Location: Sin City, NV
Posts: 2,903
Likes: 0
Received 0 Likes
on
0 Posts
because its HIS car.
from the looks of it, i think it was better that he did use a body kit because if he would have cut the oem front bumper it might as well have been in two.
from the looks of it, i think it was better that he did use a body kit because if he would have cut the oem front bumper it might as well have been in two.
#24
Junior Member
Thread Starter
Join Date: Dec 2003
Location: New Zealand, NEw Zealand
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: (beyondspecs_jamar)
lol yeah i chopped that bumper to peices stock bumper doesn't sit low enough and half the intercooler would be lower than the stock bumper
but i love my car how it looks etc...
thanks for comments .
my cars in paintshop today they said i'll get it back on thursday
i'll post pics up all painted etc...
and more when i tidy up the engine bay and all .
but i love my car how it looks etc...
thanks for comments .
my cars in paintshop today they said i'll get it back on thursday
i'll post pics up all painted etc...
and more when i tidy up the engine bay and all .