MT CRX Build and Swap
12-18-2011, 10:13 PM
#226
Honda-Tech Member
12-19-2011, 06:09 PM
#230
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
Brake lights work.... Brakes are bled... Good solid pedal... I have both running lights and high and low beams, although I put the high on the low and vise versa haha. Ill switch them up tomorrow.
But uh wheels are back on and it looks pretty low to me
But uh wheels are back on and it looks pretty low to me
12-21-2011, 06:15 AM
#231
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
Front Wheel Molding! wooohooo! Both sides!
looks low...
Getting there
So color choices on painting my wheels...
Black...
White...
Silver...
Opinions???
12-22-2011, 07:54 AM
#233
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
I have windshield wipers now. Albeit they dont quite work yet hahah... Just look finishing...
Running lights in the back and brake lights all work. Man my pets get in the way!
Shaweeeet head lights haha... Which one is the brights?
Well they look cool...
Halos.... OMG rice hahahhahah
look pretty cool actually..
Custom made by me bulb holders haha... I need to paint them black or something..
Oh ya making it look good...
Front Running Lights look pretty sick to me
Normal Headlights on
Brights and everything else!
I also have the blinkers almost working. My problem is the electronic unit to make them flash is not getting power for some reason... not sure why. But I will figure that one out and then move on to the wipers and making them work. After that I am pulling out more wiring that I dont need.
Did I mention that all of these switches are running off of the stock steering wheel mounted pieces?!?! heck yeah they are haha. Time for a clean up and then the sweetest dash and cage ever.
Now I must go to work......
Running lights in the back and brake lights all work. Man my pets get in the way!
Shaweeeet head lights haha... Which one is the brights?
Well they look cool...
Halos.... OMG rice hahahhahah
look pretty cool actually..
Custom made by me bulb holders haha... I need to paint them black or something..
Oh ya making it look good...
Front Running Lights look pretty sick to me
Normal Headlights on
Brights and everything else!
I also have the blinkers almost working. My problem is the electronic unit to make them flash is not getting power for some reason... not sure why. But I will figure that one out and then move on to the wipers and making them work. After that I am pulling out more wiring that I dont need.
Did I mention that all of these switches are running off of the stock steering wheel mounted pieces?!?! heck yeah they are haha. Time for a clean up and then the sweetest dash and cage ever.
Now I must go to work......
12-22-2011, 09:09 AM
#234
Honda-Tech Member
Re: MT CRX Build and Swap
This '90-91 bumper has the psuedo-vents on the side that hit my IC piping so I had to cut one out already and it just looks tacky to hell and back. I'd like a bumper that I only have to trim the grille out of.
12-22-2011, 05:31 PM
#238
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
I havent decided yet. Black mesh... Plexiglass... Give me ideas!?!?!
Thanks man. I am doing my best!
hhahaha. I know it is lol, but thanks for noticing! I need to find a crx one!
12-23-2011, 12:45 PM
#242
Honda-Tech Member
Re: MT CRX Build and Swap
Which ones exactly are you looking for? Those go into the slide-in clips that should be inside the molding, then they snap into the door.
If you're missing the part of the clip inside the molding, you're SOL. I've no idea where to get those.
If you're missing the part of the clip inside the molding, you're SOL. I've no idea where to get those.
12-28-2011, 02:11 PM
#244
Honda-Tech Member
Join Date: Mar 2011
Posts: 1,382
Likes: 0
Received 0 Likes
on
0 Posts
12-28-2011, 05:38 PM
#245
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
True that man!
So I did some more wiring today with my foster brother. He is actually a really big help!
Got the intake off finally! The hoses were a PITA and I broke one plastic elbow.
What is it and do I really need it?!!?
Got this stupid thing off! I am throwing it away!
Going to pull this thing off and give it a good cleaning!
Started with this today... What a mess!
See he was a big help! No more plastic wire covers and old nasty electrical tape!
Pulled all of this out today! Woohoooo!
This is looking better!
These two are awesome!
Now I have this!
I am almost done cleaning the wiring out. All wires are traced down to the source at both ends and pulled out of the wiring clip harness or the fuse box.
Also the turn signals are now fully functional as are the windshield wipers. I dont have the windshield wiper fluid hooked up or even on yet, so that is one thing I still need to do. Dome light works too
Now I will finish it up, reinstall all of my gauges, get the head back soon hopefully, then pull the whole harness back out and get the cage and dash welded in! Then enjoy!
So I did some more wiring today with my foster brother. He is actually a really big help!
Got the intake off finally! The hoses were a PITA and I broke one plastic elbow.
What is it and do I really need it?!!?
Got this stupid thing off! I am throwing it away!
Going to pull this thing off and give it a good cleaning!
Started with this today... What a mess!
See he was a big help! No more plastic wire covers and old nasty electrical tape!
Pulled all of this out today! Woohoooo!
This is looking better!
These two are awesome!
Now I have this!
I am almost done cleaning the wiring out. All wires are traced down to the source at both ends and pulled out of the wiring clip harness or the fuse box.
Also the turn signals are now fully functional as are the windshield wipers. I dont have the windshield wiper fluid hooked up or even on yet, so that is one thing I still need to do. Dome light works too
Now I will finish it up, reinstall all of my gauges, get the head back soon hopefully, then pull the whole harness back out and get the cage and dash welded in! Then enjoy!
12-31-2011, 07:11 AM
#247
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
I relocated the main relay and fuse box so I had more room under my feet! It will be hidden by the dash nicely!
We also rerouted the wires going into the engine bay for the lights, now they sit higher and out of the way.
We also rerouted the wires going into the engine bay for the lights, now they sit higher and out of the way.
12-31-2011, 09:02 PM
#249
Honda-Tech Member
Join Date: Dec 2011
Location: Billings, MT
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: MT CRX Build and Swap
And I am done wiring...
The only wiring I have left to do, is to wire up the signal to the water temp gauge, fuel level, and oil pressure gauge. Tach, Speedo, and Voltometer are done. Boost and A/F Ratio are waiting in the box. Time to get the car running now!
The only wiring I have left to do, is to wire up the signal to the water temp gauge, fuel level, and oil pressure gauge. Tach, Speedo, and Voltometer are done. Boost and A/F Ratio are waiting in the box. Time to get the car running now!
