Mr Civic's EF
#1
Mr Civic's EF
Came with the fogs.. looking to get a new bumper and si lip.
Mod list ->
DPFI -to- MPFI Conversion & wire tuck by me. (Solider and heat shrink)
B18a1 Engine
1st gen B16 Transmission
Ef Si Seats (Gotta get rails)
BMW Basket Weaves 14" 6.5
DA Rear Disc Conversion
Mod list ->
DPFI -to- MPFI Conversion & wire tuck by me. (Solider and heat shrink)
B18a1 Engine
1st gen B16 Transmission
Ef Si Seats (Gotta get rails)
BMW Basket Weaves 14" 6.5
DA Rear Disc Conversion
#3
Re: Mr Civic's EF
The body harness was all hacked up from the last owner so i put in a nice virgin dx harness i had.
Also i added some more pics and info up top you might have missed.
Im gonna try to get some updated pics today! maybe even a first start up vid.. :D
Also i added some more pics and info up top you might have missed.
Im gonna try to get some updated pics today! maybe even a first start up vid.. :D
#7
Honda-Tech Member
Re: Mr Civic's EF
Trending Topics
#8
Re: Mr Civic's EF
After a long day i finally slammed it together enough for a test fire... ITS ALIVE!
I recorded the video and it kinda scared me! fired right up but since everything is
half hooked up it has a miss. i didn't even check the plug wires on the cap.. i just
threw em on and forgot about checking them! lol so that might be the problem
right there..
Ill try to get the vid up tonight. until then im back to wiring, solider and shrink tubes
I recorded the video and it kinda scared me! fired right up but since everything is
half hooked up it has a miss. i didn't even check the plug wires on the cap.. i just
threw em on and forgot about checking them! lol so that might be the problem
right there..
Ill try to get the vid up tonight. until then im back to wiring, solider and shrink tubes
#12
Re: Mr Civic's EF
Sorry guys.. been in the process of moving 1300 miles!
I did get it running before i left.
http://www.youtube.com/watch?v=nF-qTRsHGAk
I did get it running before i left.
http://www.youtube.com/watch?v=nF-qTRsHGAk
#14
Re: Mr Civic's EF
I have a full VERY stock looking 2-1/4 inch exhaust with a quiet good flowing muffler. looks and sounds stock but flows a bit better.
on the outside im looking to keep it pretty stock looking. a littler lower with my bbs wheels and maybe a si lip. i want to keep it stock looking. i like sleepers
on the outside im looking to keep it pretty stock looking. a littler lower with my bbs wheels and maybe a si lip. i want to keep it stock looking. i like sleepers
#16
#17
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post