ECU CONVERSION HARNESS OBD0 to OBD1
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: Terrasse Vaudreuille, Quebec, Canada
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
ECU CONVERSION HARNESS OBD0 to OBD1
My engine did start up and it idle like a piece of ****
Ok so i went back to square 1
I was looking at the wiring for one of the red wires comming from the ECU conversion harness and i noticed that it goes from OBD0 A1 to OBD1 A16 and this red wire is siddered to it ?!? does this mean its a injector power wire and if so how the hell does that work ? I did my MPFI conversion allready everything matched up everything is ok i dont understand anymore
Ok so i went back to square 1
I was looking at the wiring for one of the red wires comming from the ECU conversion harness and i noticed that it goes from OBD0 A1 to OBD1 A16 and this red wire is siddered to it ?!? does this mean its a injector power wire and if so how the hell does that work ? I did my MPFI conversion allready everything matched up everything is ok i dont understand anymore
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: Terrasse Vaudreuille, Quebec, Canada
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
no idea looks exactly like the one on this add tho and the papers in the back look to be the same
http://cgi.ebay.ca/new-ECU-Con...wItem
http://cgi.ebay.ca/new-ECU-Con...wItem
Thread
Thread Starter
Forum
Replies
Last Post
vtecn8ive
Honda CRX / EF Civic (1988 - 1991)
10
07-13-2005 09:58 PM