Driver side axle for b series swap too short
07-11-2019, 05:26 AM
#1
Driver side axle for b series swap too short
My setup is a 91 CRX si with a B20b a JDM gsr transmission with a type R lsd and 91 Integra knuckles with brake upgrades. For the driver side i have a SK7-J intermediate shaft and axle for a 91 Integra. Ever thing I have read says this should work. However the axle is at least a half inch or more to short from seating fully flush agents the intermediate shaft. I have also read that a 94+ Integra intermediate shaft and axle will work or a SiR CRX intermediate shaft and axle with 91 Integra CV ends. I can not find the SiR shafts so its the 94+ Integra i can use. But before I buy more parts will this even fix the gap between the axle and intermediate? Or do i need to get costume axles made?
08-22-2019, 11:37 AM
#4
Thread
Thread Starter
Forum
Replies
Last Post
iridebiketrials
Honda CRX / EF Civic (1988 - 1991)
5
06-10-2004 05:22 AM
shiithook
Honda CRX / EF Civic (1988 - 1991)
5
05-28-2002 12:02 PM