Anyone else running skunk pro coils?
#1
Member
Thread Starter
Join Date: Dec 2003
Location: San Diego, CA
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else running skunk pro coils?
Not the full coilovers. Not the lowering springs. But the pro coils...
I'm running them and the AGX struts. The rear is slammed as low as it'll go with both perches installed, and the front is sittin' about an inch and a half from bottomed out (the perches). I'd like to see the front kept about the same height, and the rear lowered just a little more. According to skunk2, the longer sleeves are mounted in the front (just like I have mine set up) so I was wondering if anyone has these, and if so, have they put the front sleeps on the rear, and vice versa? I hate doing things opposite of how the instructions say to do when it comes to something like this...but I don't see any damage that could be done. But it's HINDsight that's 20/20...
Please post pictures if you have any of this...
Thanks in advance.
I'm running them and the AGX struts. The rear is slammed as low as it'll go with both perches installed, and the front is sittin' about an inch and a half from bottomed out (the perches). I'd like to see the front kept about the same height, and the rear lowered just a little more. According to skunk2, the longer sleeves are mounted in the front (just like I have mine set up) so I was wondering if anyone has these, and if so, have they put the front sleeps on the rear, and vice versa? I hate doing things opposite of how the instructions say to do when it comes to something like this...but I don't see any damage that could be done. But it's HINDsight that's 20/20...
Please post pictures if you have any of this...
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
thatbluecrx
Honda CRX / EF Civic (1988 - 1991)
13
08-05-2005 11:50 PM
AnitRiceSuperStar
Honda CRX / EF Civic (1988 - 1991)
3
01-22-2004 03:02 PM