Valves sound like a typewriter.
08-10-2008, 02:46 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: On a island w/ only a bridge to leave it, U.S.A
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Valves sound like a typewriter.
I had searched some threads for adjusting valves, I'm wondering if the measuring tools that were in the write up are necessary for me to tighten them?
Its a D16 non V-tec engine
As for another question what can be done to get these gnomes out of my engine?
Thanks...
Its a D16 non V-tec engine
As for another question what can be done to get these gnomes out of my engine?
Thanks...
08-10-2008, 04:58 PM
#2
Join Date: Sep 2007
Location: Allentown, Pa, U.S.
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valves sound like a typewriter. (littleblue)
well...no they are not "needed" but there is a special tool for it to hold it steady and tighten the screw at the same time, but you can make due with a needle nose and a screwdriver if necessary, just be careful
Thread
Thread Starter
Forum
Replies
Last Post