Tubing to help me bleed my brakes?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Honolulu, HI, USA
Posts: 779
Likes: 0
Received 0 Likes
on
0 Posts
Tubing to help me bleed my brakes?
Where can I get clear tubing to help me bleed my brakes properly. What size does the tubing have to be (diameter)?
Thank you in advance, please help me out!
Thank you in advance, please help me out!
#2
Honda-Tech Member
Join Date: Feb 2005
Location: Daphne, AL
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
You mean to place over the nipple? Go to home depot. In the plumbing section, just buy a few lengths of water lines for refridgerators, or better yet, it wont be clear, but get some drip system hose (Sprinklers).
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Honolulu, HI, USA
Posts: 779
Likes: 0
Received 0 Likes
on
0 Posts
Yes. I was there today but I could not find any clear tubing and I had no idea what size I needed so I got some air compressor hose which is like 3/8" and now I'm stuck with it lol.
#4
* B A N N E D *
Join Date: Jul 2004
Location: Alpharetta, GA, U.S.A.
Posts: 3,101
Likes: 0
Received 1 Like
on
1 Post
Re: (Noct)
bump because im tired of everyone telling me to use CLEAR hose and no ******* person will tell me WHICH hose or what size? Not every caliper in the world has the same exact bleeder size.
#7
H-T White Ops
Join Date: Jun 2003
Location: Nor Cal
Posts: 4,875
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Noct)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Noct »</TD></TR><TR><TD CLASS="quote">Much mahalos IslandSI and Redline96LX.</TD></TR></TABLE>
Ooohhh, Hawaii. I'll be there around may next year. If you see a boosted EBP EM1 rolling around the Hickam AFB area, wave. Probably gonna be me.
Ooohhh, Hawaii. I'll be there around may next year. If you see a boosted EBP EM1 rolling around the Hickam AFB area, wave. Probably gonna be me.
Trending Topics
#8
Re: (Noct)
I just go to my local ace hardware store. They have various diameters of clear tubing on spools. I bought like 6-10 feet of each of the sizes I thought I would need. If one doesn't fit, the other will. Good to have this stuff around for a variety of jobs. I buy the cheapest stuff they sell and have not had problems with it melting or cracking from chemical reactions to gas, brake fluid, power steering fluid, trans fluid, motor oil. If it ever does get hard and brittle, I'll just throw it away and go buy more.
Thread
Thread Starter
Forum
Replies
Last Post
underpressure02
Forced Induction
4
03-20-2006 07:06 PM
steve_meyer
Honda Civic / Del Sol (1992 - 2000)
1
05-12-2004 02:09 PM
Toda Party
Acura Integra Type-R
2
09-18-2002 01:59 PM