Temp/Gas Needle Problems
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Hawaii
Posts: 2,272
Likes: 0
Received 0 Likes
on
0 Posts
Temp/Gas Needle Problems
Someone please help me out! I need to get my gas/temp. gauges working. Here's how it goes . . . . . a few months back I wanted to put white faced gauges on, but I didn't know that you could just slip them over the needles. I wound up breaking the gas and temp pin that the needle sits on. I have tried replacing the cluster and the gas needle goes up, but it doesn't go down when I am on empty. I just recently noticed that my cruise ontrol doesn't work either . . . . do they have something to do with eachother. I have tried 2 cluster's so far, and they are either broken, or there is something wrong with my car and the way that it's reading the fuel and temp. Has anyone ever had this problem, or can someone atleast point me in the right direction? Feel free to send me an instant message on aima/aol at: crazeone69 or you can e-mail me at: crazeone69@aol.com I got today and tomorrow of and would like to try and solve this problem! Thanks a million everyone!
#2
Member
Join Date: Jul 2002
Location: In The Valley Oregon
Posts: 3,028
Likes: 0
Received 0 Likes
on
0 Posts
Re: Temp/Gas Needle Problems (part_hook_ups)
i did the same thing when i tried to put my white rice gauges in... i also went through 2 clusters, and i had the same problems.. the gas was all screwball... but i ditched it, and got an LX cluster, worked fine after that
Thread
Thread Starter
Forum
Replies
Last Post
2004, 92, accelerator, accord, civic, directional, floater, gas, honda, inaccurate, makes, move, needle, press, temperature