takin my skirt off and just asking
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: ny, america
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
takin my skirt off and just asking
okay. i have searched and searched and searches. all i come across is the hondata diagram and it is useless to me. I have a 98 civic dx that i just put my d16z6 into. now.. when i am putting my harness back to my motor i see there are two plugs that plug into my stock map sensor. first off i dont know what one to tap into. and second the colors of all of the wiires (3 on each plug) dont match the colors on my obd1 harness. (understandable) I am using the harness that is on the 98 dx. i have all proper conversion harness such as ecu and dizzy so i should have no problems as far as that goes. Should i just wire the gm 3 bar to one of the plugs in the same order i have on my obd1 harness regardless of color? or can someone help me out? i have posted on turbod16.com and not one person knows.
#2
Honda-Tech Member
Join Date: Nov 2007
Location: Tuscaloosa, AL, U.S.A.
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Re: takin my skirt off and just asking (jdmsohc2nr)
i have no clue what you are talking about. Im gonna bump this in hope that someone can help, but next time you should make the topic somewhat related to the post. We dont need your alternative lifestyle as a title then some huge run on sentence about cars in the post.
Thread
Thread Starter
Forum
Replies
Last Post
vtec-adykt
Honda CRX / EF Civic (1988 - 1991)
7
04-17-2008 06:11 PM