ricebox

I spent the whole weekend dropping this wonderful b18c5 motor into my car(EK). First was the harness problem fixed that. Then it was the damn ECU fixed that. finally got it all running good and took it for a test spin. Shifted into first went up to about 7500 rpm feathered in my new clutch and dude no **** clutch damn pedal sanked down and never came back up......GRRRRRRR Went back and bled the slave cylinder and had pressure again but clutch will not grab for nothing! I can shift into gears fine and with no problem but when i let go of the clutch pedal i get no damn movement. It's like the clutch is not engageing. Can anyone please help me before i go crazy over this! Oh yea i did noticed that the fork that the slave cylinder pushek back does not go all the way back to the right after releasing the clutch. Seems like its holding the clutch from engaging. But hold on thats not it, my damn main pully has a wabble too it what the hell is up with that. DUDES PLEASE HELP


Modified by ricebox at 12:51 AM 4/6/2004