DELshaneSOL

i notice my spark plug wire,the one that goes into the dizz, keeps poping off after driving for a while.I found this out because one day i was at a stop light. My car was idling funny, so when i got home i did a little investigation lol. well thats what i found, pushed it back in and started ran fine. then two days later does it again, so i try to open the spark plug wire end a little...as far as i could until it didnt fit into the dizzy, and it still happen the next day. This didnt happen until i bought a new dizzy. My wires are fairly new so i dont think it is those.
anyone ever notice this?


and it only happens to that one at the top.

furious94ls

I had this problem when I purchased my 98 Civic EX. The Cap and wires were aftermarket. I replaced both with OEM and haven't had a problem.

kyden

msd wires are known for popping off.

DELshaneSOL

i will try new wires any recommends?

grumblemarc

iTrader: (4)

OEM. SUMITOMO.

Jdmglenn

its just rubber, zip ties are your friend

frankenghia

^ X2. This solved it for my msd wires.

DELshaneSOL

nice imma try that first thanks

NotAJDMFanBoy

I was going to suggest RTV silicone or superglue, but zip ties are a good idea.

Go_Race_Your_Self

Hmm... Ive had MSD wires in my DelSol since I did the swap. (3 years ago) Never popped off on me....

Kev

hondaZvic

sometimes the wire can get to bunched up in there.. what i've done is pull the red wire back some. and pull the gray tip forward. if that makes any sense.

but, i believe OEM is best. thats what im running now.

N/A

Wow major lack of common sense...

Expand the end of the wire so it fits snug into the cap

Its not brain surgery to get a wire to stay on...

SMFH

hondaZvic

wow!! he said he did that already... smh..

Go_Race_Your_Self

LMFAO

N/A

He did it wrong then.

You gotta be kidding me, Its a ****ing spark plug wire

DELshaneSOL

pretty sure there is no wrong way to do it.
like you said it is a spark plug wire, are you/did you have this problem?

N/A

All the time on all kinds of vehicles

NotAJDMFanBoy

I had an issue with my Accel wires fitting on my aftermarket (Beck Arnley) cap. It just didn't feel tight like I wanted. I pushed the wire out to jam the wire in all the way. It kind of clicks in there. Then I push the boot on. It was pretty simple...

motegicivic

NGK Blue's are nice wires.

N/A

He doesn't need new wires