schmiddr2

I bought a half swapped and modded 93 cx. Specs: B18B-forged pistons, rods, and arp head studs. PR4-4-head appears to be stock. P05-ecu chipped and was told it was tuned for 7psi. It has a SST chip and I'm not sure what program was used to tune it. Injectors-stock, already bought 450cc and resistor box. Turbo-ebay, it's smaller. I will include some pics below.

Questions: What are the 3 wires in the first picture, they're hanging down next to oil filter? Also pictured is the chipped ecu. I want to buy a chip burner/reader( http://www.moates.net/product_info.php?products_id=197 ) and tune it myself, any advise? What head is in the last pic and what model?

PICTURES:

iamthefollower

Those look like Stock injectors.. you can look on the head to see what year the motor is from... I am at work at the moment so I don't have a pic to show you where to look... I'll try and get one when I get home to show you...

schmiddr2

I thought they were stock but didn't know for sure. Pic will be helpful. Thanks

iamthefollower

I'm sorry man, forgot bout this thread.. i'm going to take a pic of my head and show you where to look but i'll post it later tonight... I couldn't find a picture of a LS head to show you where to look at.. i'll take the pic and post it later for you man... unless someone else on here has a pic, help him out if you get to it before i do later...

iamthefollower

here is the pic for you...

schmiddr2

So does that mean yours is an 99'? My says 88 there. What's up with that?

iamthefollower

yes, mine is a 99.. as i stated, yours is probably in a different order on your head.. your's should say anywhere from 94-00

schmiddr2

I thought it would be 94-00 also. I posted a picture. Let me know what you think. Thanks

teamworxek9

iTrader: (5)

Looks like yours is a 8/9 the 9 satmp is just messed up a bit maybe yhe cast had a bugger in it. Could have came in a 90 teg just was cast before 90

iamthefollower

yeah that first 8 looks off... they didn't have b18's in 88 or 89??? I'm not real sure man.. I'm sorry I wasn't much help.. but it may be from a 98 though.. that's what it looks like to me... the "8"/8 the first stamp should be a 9 though..

iamthefollower

or as teamworxek9 said... could've came out in the 90 teg.. so you could have a older head on the newer bottom end...

schmiddr2

Thanks guys. I might get a vtec head eventually. Now on to the other questions. Anyone?