ROLL CAGE
08-05-2006, 11:04 PM
#1
* B A N N E D *
Thread Starter
Join Date: Feb 2004
Location: portland, oregon, usa
Posts: 1,246
Likes: 0
Received 0 Likes
on
0 Posts
ROLL CAGE
hey how much do cusco roll cages for EG HB run?
any other cool bolt in ones?
looking for some stiffness...
and price ranges i have no idea how much, i DID RUN SEARCH!! only came up with pictures and install threads.
any other cool bolt in ones?
looking for some stiffness...
and price ranges i have no idea how much, i DID RUN SEARCH!! only came up with pictures and install threads.
08-05-2006, 11:08 PM
#3
Honda-Tech Member
Re: (professor poon)
Bolt on roll cages dont do ****. There not legal in any catagory of event and are just a waste of time and more then likely will not save you in a roll over. Do it right and get a real cage.
08-05-2006, 11:35 PM
#4
Join Date: Apr 2006
Location: Lebanon
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Luserkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">Bolt on roll cages dont do ****. There not legal in any catagory of event and are just a waste of time and more then likely will not save you in a roll over. Do it right and get a real cage. </TD></TR></TABLE>
Its amazing how much bad advice is out there.
Bolt ins for SCCA, IMSA & NASA are legal for club racing your looking at around $750 or so for an Autopower http://www.autopowerindustries.com/Roll_Cages.htm
or
http://www.ioportracing.com/Me...AP581
Its amazing how much bad advice is out there.
Bolt ins for SCCA, IMSA & NASA are legal for club racing your looking at around $750 or so for an Autopower http://www.autopowerindustries.com/Roll_Cages.htmor
http://www.ioportracing.com/Me...AP581
08-06-2006, 07:21 AM
#5
Honda-Tech Member
Join Date: Dec 2004
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: (packthis)
a buddy of mine rolled his hatch with a bolt in cage--- protected him pretty well... I guess the username speaks for itself.
I have a Kirk Racing Roll bar* which is just the rear section and it was only 350. bolted in great... and i have yet to use it for its main purpose but for stiffening it didnt really do tremendous amounts.
I have a Kirk Racing Roll bar* which is just the rear section and it was only 350. bolted in great... and i have yet to use it for its main purpose but for stiffening it didnt really do tremendous amounts.
Thread
Thread Starter
Forum
Replies
Last Post
