Quick question about Apexi ws2
#1
Quick question about Apexi ws2
Buying the unviersal muffler and I just want to make sure I'm getting the right one. I have 2.5 piping already and I'm replacing my skunk2 n1. 60mm muffler inlet is the size to get right? Does the offset matter other than aesthetics? I chose offset left.
#4
Re: Quick question about Apexi ws2
Yeah I did that measurement as well, that doesn't tell me anything since I'm not a car expert. I suppose I will get a little backpressure. 70mm is 2.76 inch.
#5
Honda-Tech Member
Join Date: Apr 2009
Location: rochester, new york
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick question about Apexi ws2
idk if this helps or not, but I just measure the diameter on my ws2 exhaust I have lying on the floor. its 60mm(2.36
") out side diameter and 57mm(2.25") on the inside.
") out side diameter and 57mm(2.25") on the inside.
Trending Topics
#9
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: Quick question about Apexi ws2
The 80mm WS2 seems like a solid option for all motor or turbo folks who want to keep their cars quiet and get the best flow they can. 3" piping + long resonator + 80mm WS2 would be a solid choice I think.
#10
Re: Quick question about Apexi ws2
The fact that OP is asking this question it's safe to say he does not race his car. So all the flow or not don't really matter.
Correct me if I'm wrong, I recall reading that the WS2 for forced induction (80mm) is a straight through design, so it's more similar to Magnaflow. Therefore expect it to be louder than the NA (regular) version. It's been many years for me.
Correct me if I'm wrong, I recall reading that the WS2 for forced induction (80mm) is a straight through design, so it's more similar to Magnaflow. Therefore expect it to be louder than the NA (regular) version. It's been many years for me.
#11
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: Quick question about Apexi ws2
The fact that OP is asking this question it's safe to say he does not race his car. So all the flow or not don't really matter.
Correct me if I'm wrong, I recall reading that the WS2 for forced induction (80mm) is a straight through design, so it's more similar to Magnaflow. Therefore expect it to be louder than the NA (regular) version. It's been many years for me.
Correct me if I'm wrong, I recall reading that the WS2 for forced induction (80mm) is a straight through design, so it's more similar to Magnaflow. Therefore expect it to be louder than the NA (regular) version. It's been many years for me.
60mm:
http://www.corsportusa.com/store/cat...b2e5d45a63cce5
80mm
http://www.corsportusa.com/store/cat...b2e5d45a63cce5
#12
Re: Quick question about Apexi ws2
http://apexi-usa.com/products/?id=5330
I didn't know the Universals are different.
Now that I'm looking at this again. The Catbacks are not, correct? The website does not say.
Thread
Thread Starter
Forum
Replies
Last Post
Buying Apex'i World Sport 2 universal, is the outlet offset to the left, right, or is it in the cent
ferrarifreak93
Acura Integra
3
01-24-2006 02:55 PM