angrysmileyface

Not sure if this belongs in paint and body or here, but does anyone have a set of pictures showing where all the spot welds are on the rear qp of a 93-95 coupe? Or perhaps a how-to/video for removing one?

93 Coupe Ex w/ D16Z6 stock.

24TEN

iTrader: (2)

I've never seen one detailed out like that, but you should be able to look at a site like Majestic and see where the panel stops from their diagrams. After that, just look at the seam on your car and look for the dimples and get busy drilling. You also don't have to follow it exactly if the damage isn't over the entire piece. I've been looking at a lot of peoples quarter panel repairs and there's a good amount of pictures that will at least give you a good idea where to look for the spot welds.

angrysmileyface

I have found some, but they were not exactly a complete idea of where to find them.



I probably could just cut out the damage, but I have very little experiance with body work.

94EG8

Yes. I'll see if I can post it.



It's in the body repair manual.

24TEN

iTrader: (2)

Never knew there was a specific body repair manual but my response was more in line with DIYs and write ups by forum members. That's awesome none the less, thanks for posting that as it will come in handy for many of us on here.