bmbarnum

If picture doesn't work here is the link to the product. Just click picture to enlarge:

http://passwordjdm.com/PasswordJDM-F...P1320C137.aspx

So I know where everything goes except for the red and white wire on the harness. Also, I don't know what to do with the two connectors that are on the right of the picture (2nd and 3rd from the right). One connector has 2 plugs and the other has 3.

I have tried connecting the red to option #4 and the white to option #2. All it did was burn my fuses and light didn't turn on. I even tried connecting the wires to the extension plug (the plug with 1 output) and plugged it into #4 in the fusebox; it also burned my fuses again.

Any ideas? I have the PWjdm harness with eBay fog lights (eBay harness fried).

Thanks.

tlarimer

iTrader: (3)

I will look at mine in the morning and get some pictures for you. I removed it because I got a OEM harness and switch, but it's still all together.

bmbarnum

Ty

tlarimer

iTrader: (3)

Red and white plug into the y harness. The single plug from the y harness went into either 2 or 5 on the fuse box(i dont remember)

You should also have a relay and a fuse.

Hope this helps