PR3 Pistons
#1
Member
Thread Starter
Join Date: Jul 2002
Location: The name says it all
Posts: 3,392
Likes: 0
Received 0 Likes
on
0 Posts
PR3 Pistons
Wassup guys, i'm just wondering about what compression ratio i could expect from pr3 pistons in a gsr bottom end.
I did alittle searching and i've read that it's about the same as ITR's. I'm not positive but would i expect about 11.3:1 or higher?
thanks
I did alittle searching and i've read that it's about the same as ITR's. I'm not positive but would i expect about 11.3:1 or higher?
thanks
#4
Former Moderator
Re: PR3 Pistons (nY's FiNeSt)
Here play with the various pistons, heads, blocks, etc here:
http://www.c-speedracing.com/h...c.php
This is not an exact CR reading, but a pretty good idea.
http://www.c-speedracing.com/h...c.php
This is not an exact CR reading, but a pretty good idea.
Thread
Thread Starter
Forum
Replies
Last Post
. WAAS_SAPPENING
All Motor / Naturally Aspirated
15
06-12-2006 06:51 PM