poormans type R
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: YaktoWN VAllEy, Wa, US
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
poormans type R
So i decided.
Instead of using an ls block im going to use a b18c1 block.
I came across a bare block for $75 and the only damage is a cracked cylinder(about 1inch)
Currently i have a b16a(sir-2)
What parts can i swap over to the gsr block from the b16 block?
What other parts are necessary to do this?
Im planning on eventually goin turbo but not now. I have a Ek hatch so i want a little more torque for the extra weight.
Could anybody who has done this before give me a run-down of all the parts they used and extra parts they had to buy?
anything please!
Instead of using an ls block im going to use a b18c1 block.
I came across a bare block for $75 and the only damage is a cracked cylinder(about 1inch)
Currently i have a b16a(sir-2)
What parts can i swap over to the gsr block from the b16 block?
What other parts are necessary to do this?
Im planning on eventually goin turbo but not now. I have a Ek hatch so i want a little more torque for the extra weight.
Could anybody who has done this before give me a run-down of all the parts they used and extra parts they had to buy?
anything please!
Thread
Thread Starter
Forum
Replies
Last Post