Pics of my Engine hot off the grill at Alaniz
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: 626, CA
Posts: 8,074
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my Engine hot off the grill at Alaniz
well its recycled.
There is Charlston Ong my mechanic aka CivicFerio on these boards... I'll let you take a guess at who's shop is working on the engine... You might guess right after paying attention to the logo on the back of Joe Alaniz's shirt!!!
and last but not least, Proud of all his work and the hard earned money they are going to take from me hehe...
Charlston the man
Modified by 137 at 10:34 AM 4/16/2003
There is Charlston Ong my mechanic aka CivicFerio on these boards... I'll let you take a guess at who's shop is working on the engine... You might guess right after paying attention to the logo on the back of Joe Alaniz's shirt!!!
and last but not least, Proud of all his work and the hard earned money they are going to take from me hehe...
Charlston the man
Modified by 137 at 10:34 AM 4/16/2003
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: 626, CA
Posts: 8,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my Engine hot off the grill at Alaniz (underrated99si)
Thats for me to know and for the person that lines up against me to find out...
ive spent around 2500+
ive spent around 2500+
#5
New User
Re: Pics of my Engine hot off the grill at Alaniz (137)
Thats for me to know and for the person that lines up against me to find out...
ive spent around 2500+
ive spent around 2500+
Great pictures bro! I take it that is a B18C1?
Trending Topics
#15
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: 626, CA
Posts: 8,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my Engine hot off the grill at Alaniz (Doctor CorteZ)
because it got hollowed out and I dont plan on doing anything major with the engine, I was just fortunate enough to come up on the cash to fix it when it died...
when I start shitting gold and move back in with my parents like kid 1320 then ill think about replacing it...
when I start shitting gold and move back in with my parents like kid 1320 then ill think about replacing it...
#19
Honda-Tech Member
Join Date: Oct 2002
Location: NorCal, USA
Posts: 4,462
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my Engine hot off the grill at Alaniz (137)
because it got hollowed out and I dont plan on doing anything major with the engine, I was just fortunate enough to come up on the cash to fix it when it died...
when I start shitting gold and move back in with my parents like kid 1320 then ill think about replacing it...
when I start shitting gold and move back in with my parents like kid 1320 then ill think about replacing it...
very very nice what did you have done to it? i see it was ported
[Modified by Kid1320, 2:31 PM 4/8/2003]
#21
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: 626, CA
Posts: 8,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my Engine hot off the grill at Alaniz (Kid1320)
did a full head job, slight port, polish anything...
whatever gains could be made have been performed, the block got a nice once over, honed out the cylinder's itr pistons which are essentially the same compression... stock cams, honed out the intake mani and the throttle body.
new crank and rods... and im going to matte the bitch back to the stock tranny with cm stage 3 and spoon flywheel...
need to have the injectors balanced and blueprinted too before getting it running.. and some exhast welding has to be done on the car to get my old mid pipe to fit my twinloop without modifying the t/l
the engine had 128k on it before she died... and that was on 87 octane... its 91 from here on out lol
whatever gains could be made have been performed, the block got a nice once over, honed out the cylinder's itr pistons which are essentially the same compression... stock cams, honed out the intake mani and the throttle body.
new crank and rods... and im going to matte the bitch back to the stock tranny with cm stage 3 and spoon flywheel...
need to have the injectors balanced and blueprinted too before getting it running.. and some exhast welding has to be done on the car to get my old mid pipe to fit my twinloop without modifying the t/l
the engine had 128k on it before she died... and that was on 87 octane... its 91 from here on out lol
#25
Honda-Tech Member
Join Date: Dec 2001
Location: SC, USA
Posts: 2,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my Engine hot off the grill at Alaniz (Doctor CorteZ)
why dont you ditch that shitty intake manifold ?