UnKnOwNsLeEpEr

NEWBIEE QUESTION: ...ey...pretty new to this...so gonna asked a question...do ne body know if an after market headers of a d16a6 engine fit a d16z6 engine?

advanracing62

yep-

might want to clean up your typing a bit

Rob!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by advanracing62 &raquo;</TD></TR><TR><TD CLASS="quote">yep-

might want to clean up your typing a bit</TD></TR></TABLE>

1 point 6

headers, haha.

nate_d

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 point 6 &raquo;</TD></TR><TR><TD CLASS="quote">headers, haha.</TD></TR></TABLE>

4door93civic

you have one header.

slammed_93_hatch

or he could be correct but you can't tell cause his typing is shitty. he would be correct if he was asking if any aftermarket headers fit. Implying the (s) to different types of header there are more then one design i think i might get owned on this though cause i do suck at grammer and **** lets see what happens

jdmeg693

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slammed_93_hatch &raquo;</TD></TR><TR><TD CLASS="quote">his typing is shitty.
</TD></TR></TABLE>

UnKnOwNsLeEpEr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slammed_93_hatch &raquo;</TD></TR><TR><TD CLASS="quote">or he could be correct but you can't tell cause his typing is shitty. he would be correct if he was asking if any aftermarket headers fit. Implying the (s) to different types of header there are more then one design i think i might get owned on this though cause i do suck at grammer and **** lets see what happens
</TD></TR></TABLE>
wells i was just implyin that will an after market headers of a crx usdm d16a engine fit on a civic d16z engine if i decide to use my old headers thats all (thus the bein cheap part of the title) hehe n most of yall alrdy answered it so i guess tkz for the replys.

1990hondaHF

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 point 6 &raquo;</TD></TR><TR><TD CLASS="quote">headers, haha.</TD></TR></TABLE>

one for each side right?

UnKnOwNsLeEpEr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 point 6 &raquo;</TD></TR><TR><TD CLASS="quote">headers, haha.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4door93civic &raquo;</TD></TR><TR><TD CLASS="quote">you have one header.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1990hondaHF &raquo;</TD></TR><TR><TD CLASS="quote">

one for each side right?</TD></TR></TABLE>

hahaha. aftermarket headers meaning dc, greddy, chiraka, etc. <U>more then one header = headers.</U> got to spell it out huhs. itz ok. some people just need it to be spelled.

jolt-tsp

People need to stop wasting posts correcting other people that say "Headers" instead of "Header", as they are both technically incorrect. A header is pipe that connects two or more smaller pipes. The correct word is manifold, meaning many pipes joining to one pipe. But if someone says headers I know what they're talking about, same with if they say header, or manifold, everyone knows what the person means.

Anyway, had to get that out. I'm sure I'll get flamed for something.

HATCHingMN

Dont any D-series motor parts bolts onto all D-series motor!!
I thought they are interchangeable much like the B16's and B18's.

SOHC_MShue

yes the "exhaust manifolds" are interchangeable

UnKnOwNsLeEpEr

tks

JICEK9

d series... get a turbo instead and thank me tomorrow