need swap help
08-06-2006, 12:25 PM
#1
Thread Starter
Join Date: Nov 2004
Location: houston, tx, usa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
need swap help
im swapping a b16a2 out of a 2000 si into a 96 civic lx was auto
motor alread in car linkage already squared away having wiring issues due to use of obd2b engine harness in obd2a car
does anyone know how i need to rewire this green 22 pin connector on the dash harness that coneccts to the engine harness? and is the conector over ontop of the drivers side strut tower is it tpinned the same on the car and the engine harness.
if any one has any information on how this needs to be rewired i would appreciate any assistance you might have...
motor alread in car linkage already squared away having wiring issues due to use of obd2b engine harness in obd2a car
does anyone know how i need to rewire this green 22 pin connector on the dash harness that coneccts to the engine harness? and is the conector over ontop of the drivers side strut tower is it tpinned the same on the car and the engine harness.
if any one has any information on how this needs to be rewired i would appreciate any assistance you might have...
Thread
Thread Starter
Forum
Replies
Last Post
1991crx16
Honda CRX / EF Civic (1988 - 1991)
1
10-18-2011 01:50 PM
TwoKSiR
Honda Civic / Del Sol (1992 - 2000)
1
09-28-2006 08:20 PM