Need a measurement
02-24-2004, 11:00 AM
#1
Honda-Tech Member
Thread Starter
Need a measurement
Alrighty
I need the distance around/circumference of DC/EG/EK TA bushings (w/ rear disc if it matters). I am having a hard time w/ mine - My mugen ones are 10" and the stockers are 10.5". Clearly, the problem w/ that is the mugen ones will go straight through the hole in the arm...
I am told the 10.5" are actually from DA integra. Please tell me that's not true
Modified by pdiggitydogg at 3:37 PM 2/24/2004
I need the distance around/circumference of DC/EG/EK TA bushings (w/ rear disc if it matters). I am having a hard time w/ mine - My mugen ones are 10" and the stockers are 10.5". Clearly, the problem w/ that is the mugen ones will go straight through the hole in the arm...
I am told the 10.5" are actually from DA integra. Please tell me that's not true
Modified by pdiggitydogg at 3:37 PM 2/24/2004
02-24-2004, 11:36 AM
#2
Honda-Tech Member
Thread Starter
oh come on
I know some of you w/ rear disc have thing to do. Go out and measure for me please! I need to know this today before 6est!
I know some of you w/ rear disc have thing to do. Go out and measure for me please! I need to know this today before 6est!
Thread
Thread Starter
Forum
Replies
Last Post
Mooneyes13
Honda Civic / Del Sol (1992 - 2000)
7
10-18-2005 07:41 AM