Need ECU HELP
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Need ECU HELP
Hey i have a 96 civic Hatch CX and it has a B16A2(si) swap running off a P73 ecu. When driving i get on it and at 4500 rpm it pops like Vtec but u feel the car being held back then at 6000 rpm it takes off like crazy. Just wondering anyones advice on a different ecu or what to do with this P73. Thanks for your time
#3
Honda-Tech Member
Join Date: Oct 2002
Location: chicago burbs, Il, USA
Posts: 5,150
Likes: 0
Received 23 Likes
on
23 Posts
Re: Need ECU HELP
P73 VTEC = 5200 - 5750 depending on which one it is.
4500 VTEC = P72
the reason why it feels like it's being held back, a B16 doesn't like 4500 RPM VTEC point.
get the right ECU (P2T) OR get an OBD1 ECU and have it tuned.
4500 VTEC = P72
the reason why it feels like it's being held back, a B16 doesn't like 4500 RPM VTEC point.
get the right ECU (P2T) OR get an OBD1 ECU and have it tuned.
#4
Honda-Tech Member
Join Date: Jan 2009
Location: Albuquerque, NM
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need ECU HELP
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need ECU HELP
Thanks for the info. I have a p2t but didn't kno the harness in the car was obd2a and ofcourse the p2t is obd2b. I wanted to somehow get a 99-00 harness and use the ecu for the motor or just get a p28 and have it tuned for the setup. Anyone have harness or p28? Thanks. Again
Thread
Thread Starter
Forum
Replies
Last Post
cityofcaterpillars
Engine Management and Tuning
2
04-13-2016 07:06 PM