My car... be gentle
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
My car... be gentle
Well, here's the new pics. Most of them turned out pretty crappy cause the camera was set to low-quality but you'll get the idea. I'm gonna snap some better-quality shots tomorrow. Anyway, on with the show:
Now, normally I dont do um... "visual" mods but I sorta ran into someone and it was cheaper to replace the hood with a C/F than to get a stock one (at my price at least). Plus, I kinda dig it. The seat... i've gotten some heat for this one . The cloth on the driver's seat got ripped and I wanted to replace it and uh... the motor mods sapped most of my money so I only had enough to buy one seat (and I wasn't gonna buy two Corbeau's for hte price of one sparco). I am GOING to get another one but I want a torino and I dont have the cheese for it right now. But anyway... that's my story and I'm stickin to it!. EV.
Now, normally I dont do um... "visual" mods but I sorta ran into someone and it was cheaper to replace the hood with a C/F than to get a stock one (at my price at least). Plus, I kinda dig it. The seat... i've gotten some heat for this one . The cloth on the driver's seat got ripped and I wanted to replace it and uh... the motor mods sapped most of my money so I only had enough to buy one seat (and I wasn't gonna buy two Corbeau's for hte price of one sparco). I am GOING to get another one but I want a torino and I dont have the cheese for it right now. But anyway... that's my story and I'm stickin to it!. EV.
#2
Honda-Tech Member
Join Date: Oct 2000
Location: ELIZA owns me, GA, USA
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
Todd, looks great man.
I like the seat, be nice if there was two.. ... but its cool.
Glad to see the stuff done.
LATES
I like the seat, be nice if there was two.. ... but its cool.
Glad to see the stuff done.
LATES
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
I WILL have two red sparco's by next spring... just give me a chance to recuperate from the engine swap, el Pat . I'm painting the rims black either with BBQ paint or black powdercoat this winter... I never really liked black wheels but now for some reason, I really like 'em. Just makes the car look less flashy I guess. Not like a big red seat ISNT flashy but hey... it was all I could get. EV.
#7
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (kmccarthy)
I agree, but they'll just be my Typhoons for now. Maybe one day I'll get my SW388's but until then... ugh, "no money" sucks. EV.
Trending Topics
#10
Honda-Tech Member
Join Date: Aug 2001
Location: Richmond, B.C.
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (kmccarthy)
nice car ... i love it .. wish i had one just like that ...
B18C5 wif 197 whp ... what mod u have in it ?
except the AEM cold air intake
nice sliver valve cover ... look nice .. other then the usual red ....
as for the single seat ... who care about the passenger ... i would rahter spend that money on sth else that will make me faster then make the passenger more comfortable at high-g load situration ..
[Modified by BAR-F1, 7:15 AM 8/8/2001]
[Modified by BAR-F1, 7:16 AM 8/8/2001]
B18C5 wif 197 whp ... what mod u have in it ?
except the AEM cold air intake
nice sliver valve cover ... look nice .. other then the usual red ....
as for the single seat ... who care about the passenger ... i would rahter spend that money on sth else that will make me faster then make the passenger more comfortable at high-g load situration ..
[Modified by BAR-F1, 7:15 AM 8/8/2001]
[Modified by BAR-F1, 7:16 AM 8/8/2001]
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
The cams are stage 3's. I should be able to hit over 200 when we tune it and bore out the T/B to 64mm. I am running the Jspec 4-1 R header and stock R compression, so I have plenty of room left for improvement. The block was bought straight from Honda so yes, it is an original 2001 Factory Honda R block - papers are in the glove box. EV.
#15
Honda-Tech Member
Join Date: Aug 2001
Location: Bangkok, Thailand, Thailand
Posts: 4,096
Likes: 0
Received 1 Like
on
1 Post
Re: My car... be gentle (DragIIcivic)
wow not bad
go paint your rims gunmetal grey.. I think it'd make your car look scary
and hurry up and get the passenger side seat in! go buy some red JDM CTR/ITR Recaro seats for the passenger side - that'd complete the look.. hmm.. maybe not on second thoughts since your seat is a sparco.. ok ok go for sparco then.. hehe
go paint your rims gunmetal grey.. I think it'd make your car look scary
and hurry up and get the passenger side seat in! go buy some red JDM CTR/ITR Recaro seats for the passenger side - that'd complete the look.. hmm.. maybe not on second thoughts since your seat is a sparco.. ok ok go for sparco then.. hehe
#17
Banned
Join Date: Jul 2001
Location: Southern California..., Torrance/Gardena
Posts: 5,939
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
That is one clean looking Si. Job well done. Damn, now I want a CF hood and a set of JUN stage 2 cams. Can I have your car?
#20
Trial User
Join Date: May 2000
Location: Los Angeles, CA
Posts: 7,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
Is this the same EVtec from clubsi?? welcome dude..
if so... didn't know you were posting here now? clubsi got you down?
if so... didn't know you were posting here now? clubsi got you down?
#21
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (GSRwBOOST)
Hey man, yep - same EV (Todd) from ClubSi. Its not that its got me down, I'm just branching out to other, better-in-some-aspects sites. Seems like much less drama and bickering on here! Hit me up on AIM! EV.
#22
Honda-Tech Member
Join Date: Mar 2001
Location: Feeling FOBulous
Posts: 6,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (ElectronVTEC)
Hey man, yep - same EV (Todd) from ClubSi. Its not that its got me down, I'm just branching out to other, better-in-some-aspects sites. Seems like much less drama and bickering on here! Hit me up on AIM! EV.
Nice car BTW. What kinda CF hood is that?
SSR Type Cs would look great with your Si. What kinda suspension are you running?
#23
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (kengs)
The hood is a FiberImages and my suspension is Neuspeed Sports with Tokico blues, Mugen 22mm rear sway (reinf. brackets are welded to the frame, a custom lower tie bar was fabricated between the LCA lower bolts on either side). Also a KAAZ LSD. It can get better and maybe next year, I'll concetrate on something a bit stiffer and adjustable. Oh, hey how ya likin that C's? I picked up the C's DPS from Dan Ponze just last week and I should have it by Monday (with the R linkage). I cant wait to put it in! Peace, EV.
ps. If anyone frequents AIM, my name is Metaphor Matador. EV.
ps. If anyone frequents AIM, my name is Metaphor Matador. EV.
#25
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: South Bend, IN, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My car... be gentle (JDMb16aEF9)
Unfortunately I dont have the stock wheels anymore. So i'm kinda stuck with these til I can afford my Regamasters or Spoons. Ah well... I do what I can. EV.