Machine Shops in N.Va/DC/MD
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: STEEL CITY THE BUS STOP, us
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Machine Shops in N.Va/DC/MD
Anyone have experience with a good machine shop to build my SOHC block for turbo use. I have heard about Tempest Racing, don't know if they have an in house shop though. Anyone else with experience with machie shops in these areas.?
I just need a freshening bore, crank polish and installation of the rods and pistons, new oil pump.
Thanks guys.
-G
I just need a freshening bore, crank polish and installation of the rods and pistons, new oil pump.
Thanks guys.
-G
#3
Honda-Tech Member
Join Date: Mar 2003
Location: Old Dominion
Posts: 5,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: Machine Shops in N.Va/DC/MD (Witty)
Hmm. Check out http://www.brauningmotorsports.com
If you go through them, let them(Mark) know that Ickey sent you their way.
If you go through them, let them(Mark) know that Ickey sent you their way.
#4
Honda-Tech Member
Join Date: Aug 2003
Location: Rochester, NY
Posts: 1,791
Likes: 0
Received 0 Likes
on
0 Posts
#5
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: Machine Shops in N.Va/DC/MD (gphybrid)
shop in delaware did mine. sleeves and all.
http://www.accuratepower.com
web page is basic, but maybe give them a call?
http://www.accuratepower.com
web page is basic, but maybe give them a call?
#6
Re: Machine Shops in N.Va/DC/MD (Nihonjin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nihonjin »</TD></TR><TR><TD CLASS="quote">Hmm. Check out http://www.brauningmotorsports.com
If you go through them, let them(Mark) know that Ickey sent you their way. </TD></TR></TABLE>
Is mark still doing this?
The CRXGURU charges almost 2K for labor on a motor swap. I bet his other prices are high too.
Modified by Witty at 3:20 PM 10/21/2003
If you go through them, let them(Mark) know that Ickey sent you their way. </TD></TR></TABLE>
Is mark still doing this?
The CRXGURU charges almost 2K for labor on a motor swap. I bet his other prices are high too.
Modified by Witty at 3:20 PM 10/21/2003
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: STEEL CITY THE BUS STOP, us
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: Machine Shops in N.Va/DC/MD (BauleyCivic)
Nice guys keep them coming. I will start calling at lunch. I've heard Mark Brauning does excellent work btw.
#9
Honda-Tech Member
Join Date: Jan 2002
Location: Jessica Beale AFB, Califas...
Posts: 2,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Machine Shops in N.Va/DC/MD (BauleyCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BauleyCivic »</TD></TR><TR><TD CLASS="quote">Burtonsville Performance Machine is very good</TD></TR></TABLE>
I second Burtonsville they do excellant work......have seen many jobs from there and have been satisfied.
I second Burtonsville they do excellant work......have seen many jobs from there and have been satisfied.
Thread
Thread Starter
Forum
Replies
Last Post
hondaluva
All Motor / Naturally Aspirated
21
06-09-2005 04:22 AM
Mr. 1582
Honda Civic / Del Sol (1992 - 2000)
18
02-11-2004 04:57 PM
DCLuder
Tech / Misc
5
08-20-2003 07:45 AM