Little Problem, Crank Pulley Question
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Fredericksburg,VA
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Little Problem, Crank Pulley Question
im putting together a d16y7 for my daily. since i went from z6 to this, i was reusing my parts to put together this as ob1.
today, i tried to install the crank pulley, and noticed that it is hitting the cover, and only going on to the crank about an 1/8th of an inch.
pretty much what i need to know is if the z6 crank pulley, and y7 crank pulleys are the same, or different.
this could save me 50 bucks for a junkyard, and get my car on the road on schedule
thanks
John
today, i tried to install the crank pulley, and noticed that it is hitting the cover, and only going on to the crank about an 1/8th of an inch.
pretty much what i need to know is if the z6 crank pulley, and y7 crank pulleys are the same, or different.
this could save me 50 bucks for a junkyard, and get my car on the road on schedule
thanks
John
Thread
Thread Starter
Forum
Replies
Last Post
projectef
Honda CRX / EF Civic (1988 - 1991)
2
12-28-2006 05:25 AM