yes i searched, and ive read for nearly three hours and i still dont understand. sorry.

heres what i got:
obd1 b18c
skunk2 intake manifold
chipped p28 ecu w/ basemap from phearable.

i want to use my LS wiring harness but i have no clue how to wire in the vtec. since the car is a vx model the car has vtec already, i just need how to wire it from the head to the harness. the vtec sol. has a green and yellow wire coming out, but no plug, and i dont have a plug to use for the vtec OP switch, so how do i run wire to it.

i hope this isnt confusing, ive tried to cover everything. thanks for any help.


p.s. i dont know **** about wiring, thats why i want to do this myself, so keep that i mind when replying

 

bump for worrk

 

anyone

 

Go to http://www.ff-squad.com and go to tech net they have the pin out for vtec. Your 92 should have vtec on the chassis side. If you do not know about wiring you may want to just get an obd1 vtec engine harness.