Its been a while.. .D16y8/d15b2 questions.
11-29-2011, 06:53 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2011
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Its been a while.. .D16y8/d15b2 questions.
I blew a rod the through my block. I use to be very savvy with all of this but I've been off the internet a while.
What all do I need to just replace my d16y8 with a d15b2 I found one relatively cheap and since I didn't plan on this blowing up I need it to be that way.
Head bolts, gasket, fluids is all I think I need?
Also haven't pulled it apart yet to determine whether this is feasible or not. What are some tell-tale signs to look for that would indidcate my head was damaged?
Will the stock exhaust manifold bolt up to the d15b2?
What all do I need to just replace my d16y8 with a d15b2 I found one relatively cheap and since I didn't plan on this blowing up I need it to be that way.
Head bolts, gasket, fluids is all I think I need?
Also haven't pulled it apart yet to determine whether this is feasible or not. What are some tell-tale signs to look for that would indidcate my head was damaged?
Will the stock exhaust manifold bolt up to the d15b2?
Thread
Thread Starter
Forum
Replies
Last Post