ITR muffler on EG?
03-30-2003, 08:16 PM
#1
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
ITR muffler on EG?
I have my mom's stock ITR muffler and I wanna know what I have to do to make it fit? I tried to see if it would and it stuck out about 3or 4 inches. If I used the ITR b-pipe would it fit? Or do I have to get custom piping?
03-30-2003, 08:30 PM
#3
Member
Join Date: Dec 2000
Location: Anaheim, ca, us
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
We have used it on a few of our cars and we removed the tip because of it sticking out so far. It looks nice without the tip really undercover. If not you can always re do the piping and tuck it under more. 
03-30-2003, 09:28 PM
#4
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (prospeed)
How much does it cost to re-do the piping so I can have the muffler tuck under. I would like it to look like this:
Maybe even a little more tucked in.
Maybe even a little more tucked in.
03-30-2003, 10:02 PM
#6
Honda-Tech Member
Join Date: Jun 2002
Location: Northern, CA, usa
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
you need 92-95 ex si piping or 96-00 ex piping..i got a 94 ls engine with 00 ex piping and 96 ek muffler =_) rattles but free
Trending Topics
03-30-2003, 10:11 PM
#8
Join Date: Nov 2001
Location: Racine, WI, USA
Posts: 1,770
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
OT: but check out the family line up....
92 Hatch - me
01 Integra Type R 00-49 - I/H/E/FR/FPR - mom
02 WRX - H&R sports/F&R strut bar/R sway bar - dad
01 Integra Type R 00-49 - I/H/E/FR/FPR - mom
02 WRX - H&R sports/F&R strut bar/R sway bar - dad
03-30-2003, 10:34 PM
#11
Member
Join Date: Dec 2002
Location: Zerega, Flatlands, HuntsPoint, Ny, USA
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (sivik2nr)
OT: but check out the family line up....
92 Hatch - me
01 Integra Type R 00-49 - I/H/E/FR/FPR - mom
02 WRX - H&R sports/F&R strut bar/R sway bar - dad
92 Hatch - me
01 Integra Type R 00-49 - I/H/E/FR/FPR - mom
02 WRX - H&R sports/F&R strut bar/R sway bar - dad
03-30-2003, 10:44 PM
#12
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (NeVeR bLoWn)
u better never argue with your parents because they truely are special...i wish i could get my mom to come pick me up somewhere and she wouldnt even have to call me to tell me she's in the area...id just hear her rippin Vtec...and lets not even get into dad there wow...you got it made...yo u could even drive your parents cars around and tell people they are all yours...who the hell is gunna believe your mom got a TYPE R...lol damn thats what i would do... >>walking away now- going to have a nice long conversation with my parents and their automobiles<<
03-31-2003, 12:02 AM
#13
Honda-Tech Member
Join Date: Apr 2002
Location: oakland, ca, usa
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
it'll work... i had it on my car for a while but got tired of the tip sticking out so i took it off....
if you get a whole new piping done at a muffler shop, just tell them to do some cutting to make it fit perfect..... the tip sticks out more cause the teg rear bumpers stick out further then the EG's...
BTW you got some ******* kool as parents ITR, WRX........(i meant to say that the first time i read your sig)
[Modified by DOHCtorTHRUST, 9:04 AM 3/31/2003]
if you get a whole new piping done at a muffler shop, just tell them to do some cutting to make it fit perfect..... the tip sticks out more cause the teg rear bumpers stick out further then the EG's...
BTW you got some ******* kool as parents ITR, WRX........(i meant to say that the first time i read your sig)
[Modified by DOHCtorTHRUST, 9:04 AM 3/31/2003]
03-31-2003, 09:26 AM
#14
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (DOHCtorTHRUST)
it'll work... i had it on my car for a while but got tired of the tip sticking out so i took it off....
if you get a whole new piping done at a muffler shop, just tell them to do some cutting to make it fit perfect..... the tip sticks out more cause the teg rear bumpers stick out further then the EG's...
BTW you got some ******* kool as parents ITR, WRX........(i meant to say that the first time i read your sig)
[Modified by DOHCtorTHRUST, 9:04 AM 3/31/2003]
if you get a whole new piping done at a muffler shop, just tell them to do some cutting to make it fit perfect..... the tip sticks out more cause the teg rear bumpers stick out further then the EG's...
BTW you got some ******* kool as parents ITR, WRX........(i meant to say that the first time i read your sig)
[Modified by DOHCtorTHRUST, 9:04 AM 3/31/2003]
03-31-2003, 10:35 AM
#15
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2001
Location: Phoenix
Posts: 6,494
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
I'm about to do this aswell. I'm just gonna take it to an exhaust shop to mate it with my tanabe piping.
User egghead has it on his and this is what he did (*i think*)
I've seen it in person and it looks sweet.
He had an exhaust shop do the axle pack and connect to his tanabe piping.
I'm not sure if they re-did the hangers or not.
As you said the tip sticks out too far. He cut the tip and now it looks like a super
short version.
I should have mine on by the end of the week
User egghead has it on his and this is what he did (*i think*)
I've seen it in person and it looks sweet.
He had an exhaust shop do the axle pack and connect to his tanabe piping.
I'm not sure if they re-did the hangers or not.
As you said the tip sticks out too far. He cut the tip and now it looks like a super
short version.
I should have mine on by the end of the week
03-31-2003, 03:35 PM
#16
Honda-Tech Member
iTrader: (2)
Join Date: Nov 2002
Location: San Pedro, CA
Posts: 11,076
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
I have an itr muffler on my eg, the muffler shop just cut the piping a little so it tucked, and i had them cut the tip off and cut it in half then weld it back on, looked good, just gotta get a shop that does good welding or else it'll look like bugers on there.
________
400GT
________
400GT
Last edited by ken-e; 02-16-2011 at 01:39 AM.
03-31-2003, 04:46 PM
#18
Junior Member
Join Date: Apr 2001
Location: Gaitneau, Qc, Canada
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hooch at 8400-RPM)
Just trying to clear thing up here...
the reason is I just got me a GSR muffler for free and it should be enought to let the D16 breathe for now...
You guys mention cutting before the muffler? I know the tip will be too long but the part that goes over the LCA, it does not fit without modifications?
I'm a visual kind of guy, anyone got pics?
Thanks
the reason is I just got me a GSR muffler for free and it should be enought to let the D16 breathe for now...
You guys mention cutting before the muffler? I know the tip will be too long but the part that goes over the LCA, it does not fit without modifications?
I'm a visual kind of guy, anyone got pics?
Thanks
03-31-2003, 10:27 PM
#21
Honda-Tech Member
Join Date: May 2001
Location: Trinidad, W.I.
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (Hatchcrap Ownz J0o)
I have not yet actually tried this b-cuz I am lazy, so let me clarify what I have heard:
The ITR or GSR muffler will fit as is, but the tip will stick out.
So I assume all you need to do is cut the pipe that the tip bolts to so it will fit w/o sticking out ?
Will the rear section of the muffler bolt up fine w/o modification ?
X2
The ITR or GSR muffler will fit as is, but the tip will stick out.
So I assume all you need to do is cut the pipe that the tip bolts to so it will fit w/o sticking out ?
Will the rear section of the muffler bolt up fine w/o modification ?
X2
04-01-2003, 04:59 PM
#22
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (X2BOARD)
Yea, I wanna clear things up as well(sorry I'm slow). Are the people that have it cutting the tip and then re-welding it on? Or are you cutting the axle-back part? Or are you just getting new piping and not cutting anything?
04-02-2003, 04:53 PM
#24
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (cidhb33)
I tried putting integra exhaust on my hatch and the axel-back and tip where both to long.
04-02-2003, 05:04 PM
#25
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR muffler on EG? (blackANESE)
Wow!!! Cant beat that family of cars...Id be embarrased to even drive over to your place!!! I like my moms 2000 V6 Accord.....damn...looks like I dont even know what Im missin out on...