aown61

Hi guys, hoping you can shed some light onto my pondering.

My friend has recently smashed his DC2 up and is beyond repair. I am needing a few new bits and bobs for my eg6 and was wondering whether they would be interchangable.

will the driveshafts from the dc2 fit my egs

will the steering rack fit my eg6 (if it will would it require the steering column and anything else from the dc2)

thanks for any help

-Andy

JDM_CivicEG6

What kind of engine is in your EG?

aown61

my mistake, the engine in my eg6 is the b16a and the dc2 is b18c

x_outlaw_x

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aown61 &raquo;</TD></TR><TR><TD CLASS="quote">Hi guys, hoping you can shed some light onto my pondering.

My friend has recently smashed his DC2 up and is beyond repair. I am needing a few new bits and bobs for my eg6 and was wondering whether they would be interchangable.

will the driveshafts from the dc2 fit my egs

will the steering rack fit my eg6 (if it will would it require the steering column and anything else from the dc2)

thanks for any help

-Andy</TD></TR></TABLE>
axles will fit for sure, not sure about the steering rack

BlueIntegraBoy

iTrader: (5)

Axles will fit as long as you swap in a B-series into your hatch and the steering rack will bolt in too.