idling problem with obd2-obd1 conversion
11-14-2006, 03:01 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: jonesboro, ar, us
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
idling problem with obd2-obd1 conversion
can anyone tell me why my car idles like a wrx when i have obd2-obd1 conversion hooked up with an obd1 PO6 ecu?? if it ran like a wrx, i wouldn't mind, but it runs like complete butt... so if anyone can help me out with this situation, i'd be highly appreciative.
my setup: 98 ek hatch, b18 ls engine, gsr tranny, obd2 ls dizzy, obd2 civic injectors, stock wiring harness. i have done the 3-wire to 2-wire iacv, and ckf sensor tricks.
will run good on my obd2 civic ecu, but i know it's not getting the power it should with it.
my setup: 98 ek hatch, b18 ls engine, gsr tranny, obd2 ls dizzy, obd2 civic injectors, stock wiring harness. i have done the 3-wire to 2-wire iacv, and ckf sensor tricks.
will run good on my obd2 civic ecu, but i know it's not getting the power it should with it.
Thread
Thread Starter
Forum
Replies
Last Post
ek95
Honda Civic / Del Sol (1992 - 2000)
1
02-05-2013 06:47 PM
brotech
Honda Civic / Del Sol (1992 - 2000)
1
12-20-2005 08:02 AM