EJ8_TCAN

hi, i searched through all the archives and i am still unable to find a DIY head gasket replacement DIY for a b16. Can someone help me and provide a write-up on how to replace the head gasket and all that good stuff? thanks..

philosofy1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ8_TCAN &raquo;</TD></TR><TR><TD CLASS="quote">hi, i searched through all the archives and i am still unable to find a DIY head gasket replacement DIY for a b16. Can someone help me and provide a write-up on how to replace the head gasket and all that good stuff? thanks..</TD></TR></TABLE>

IMO, if you are going to do something like a haedgasket, you should take the time to purchase a repair manual. doing a headgasket is crucial. the last thing you want is some backyard mechanic telling you the wrong torque specs.

not to mention, a manual can always be handy around the house.

crazyguy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by philosofy1 &raquo;</TD></TR><TR><TD CLASS="quote">


not to mention, a manual can always be handy around the house. </TD></TR></TABLE>
agree...and the right tools too..like a torque wrentch.

rivaladore

here ya go buddy https://honda-tech.com/zerothread?id=1404959

go to http://www.jdmlyfestyle.com, same write up there as well but with working pics....i was at this site two days ago and it was working for some reason its down right now.....just check back i guess........the honda-tech link should suffice for now

get a manual/torque wrench

fc3srx729

Get the Factory Service Manual not the Hayes...