gripnotdrift

iTrader: (2)

I got a question for all of you.

Call me an idiot, but I tried putting my CTR (99-00) Climate control in my Civic (99-00) and that **** don't fit.

The vents are too far to the left side to lign up with the ducts (if you look at pics of them you will see the vents are offset to the opposite side by a few inches - they hit the control box), also the climate control cage is indented on the left side to fit the climate box, but not on the right side.

That **** dosn't even come close to fitting.

I assume I need to find a rhd air duct and a rhd radio/climate cage?

Any help would be great. Thanks

GiMpInThaCiv

maybe you would get more info if you asked nicely buddy

I Shot 50 Cent

Yeah i think you need the RHD heater box/center vents.

gripnotdrift

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GiMpInThaCiv &raquo;</TD></TR><TR><TD CLASS="quote">maybe you would get more info if you asked nicely buddy</TD></TR></TABLE>


please tell me you are kidding.



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Shot 50 Cent &raquo;</TD></TR><TR><TD CLASS="quote">Yeah i think you need the RHD heater box/center vents. </TD></TR></TABLE>

thanks. got any idea where i can get that? youd figure it would be more plentiful considering the amount of jdm climate controls that are out here.

gripnotdrift

iTrader: (2)

a lil b4 work bump cuz im desperate to know what i need!!!!!!!

310HPS2k

cut the damn air vents

turbotime

just cut the vetns, otherwise your gonna need to pull your whole dash.

..will the rhd boxes even FIT with an lhd dash? iw ould think if you put the rhd box n vents in then they would just collide with the dash since its setup for lhd. just a thought.

gripnotdrift

iTrader: (2)

There is a 4 inch arm extension to mount the air ducts to on the left. So there is room to put a rhd air duct. Assuming that the air box has the same size output duct.

I appreciate all the input. Has anyone done this properly or know of anyone that has? Or does everyone just cut the vents and half *** it?

Ive seen a lot of these in cars so someone has to have done this right.

ilovemysedan

CUT THE VENTS!! easy solution

gripnotdrift

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ilovemysedan &raquo;</TD></TR><TR><TD CLASS="quote">CUT THE VENTS!! easy solution </TD></TR></TABLE>

GOOD THING YOU READ WHAT I JUST WROTE.

.Beaver

all this work and trouble to reach farther for the controls, to have fake carbon fiber, and to have a CTR badge, pretty ricer if you ask me.

310HPS2k

its jdm rice! its the new thing thats going around!!!

gripnotdrift

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Beaver &raquo;</TD></TR><TR><TD CLASS="quote">all this work and trouble to reach farther for the controls, to have fake carbon fiber, and to have a CTR badge, pretty ricer if you ask me.</TD></TR></TABLE>

yeah nobody asked for your opinion on if its ricey or not. don't come in someones post whos asking a how-to question and throw out comments like that, what are you 5? I bet if I saw your p.o.s. I could point out some things that I don't like, so stfu. and by the way it brings the radio closer to me, thats why im doin the conversion.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 310HPS2k &raquo;</TD></TR><TR><TD CLASS="quote">its jdm rice! its the new thing thats going around!!!</TD></TR></TABLE>

wtf is jdm rice. oh and 310hp on an s2000? Is that what kind of power you think an intake adds???????
go post ur ****-talkin in someone elses post.

gripnotdrift

iTrader: (2)

Please only post if you have an idea or an answer. Lets not flood this with bs remarks.

I figured someone has done this the RIGHT way and I figuered this was the place to ask, so negative comments aside, any help would be nice. Thanks

.Beaver

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gripnotdrift &raquo;</TD></TR><TR><TD CLASS="quote">

yeah nobody asked for your opinion on if its ricey or not. don't come in someones post whos asking a how-to question and throw out comments like that, what are you 5? I bet if I saw your p.o.s. I could point out some things that I don't like, so stfu. and by the way it brings the radio closer to me, thats why im doin the conversion. </TD></TR></TABLE>
Oh cry me a river douchebag.

gripnotdrift

iTrader: (2)

are you done yet?

.Beaver

now I am.

gripnotdrift

iTrader: (2)

sweet. thanks for the input.

anyone else?

orientalgunz_00

i'm not too sure if this'll work, but you might want to look into the 96-98 air ducts...when i did my 99-00 climate control into my 96-98, i noticed that the reason you had to switch out the center ducts was b/c the 96-98 ventts came out towards the left more...if that's the case, it MIGHT work w/ the JDM one since the controls are located on the right, and the vents are to the left more also...research it more and ask people who've already done the conversion...i'm sure someone will help you...gl

gripnotdrift

iTrader: (2)

you dont happen to have ur old vents do you?????

Rstripper

I do if He dont

gripnotdrift

iTrader: (2)

how much you want for em???

orientalgunz_00

i'm not sure if i still have them, i'll have to check but if i do have them, just pay for shipping and they're yours...

gripnotdrift

iTrader: (2)

Sweet! Let me know. Thanks

Itzmy91Teg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gripnotdrift &raquo;</TD></TR><TR><TD CLASS="quote">Please only post if you have an idea or an answer. Lets not flood this with bs remarks.</TD></TR></TABLE>

rember man...honda-tech doesn't have tech...just people with bullsh*t answers