Hondata s200 socketing questions
02-16-2005, 10:50 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2004
Location: long beach, Ca, USA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Hondata s200 socketing questions
Ok...I have a p28 ecu with a mugen chip in it (socketed in). I bought an s200 model w/ datalogging and I am going to get it all tuned up by church auto testing up in torrance and he told me that he doesnt prepare the ecu.
What do I have to do to get my ecu ready for hondata tuning?? I know i have to desolder the old chip out and socket in the new one from hondata...right?? Then there is something about the 4-pin connector?? This is where I start to get lost.
If I have someone socket my ecu for me...can i still drive it for a week until i get it tuned or will it be undrivable until i go to see church. Is my best bet to buy a virgin p28 and go from there??
Thanks in advance for all your help.
What do I have to do to get my ecu ready for hondata tuning?? I know i have to desolder the old chip out and socket in the new one from hondata...right?? Then there is something about the 4-pin connector?? This is where I start to get lost.
If I have someone socket my ecu for me...can i still drive it for a week until i get it tuned or will it be undrivable until i go to see church. Is my best bet to buy a virgin p28 and go from there??
Thanks in advance for all your help.
02-16-2005, 11:14 PM
#2
Member
Join Date: Jun 2004
Location: Little Elm, TX, united states
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hondata s200 socketing questions (98vsmferio)
Dude... I am doing the same thing. I have a P28 that I am trying to get socketed, I have tried to find someone to do it for me.(with no luck) The best bet is to send it to Hondata. So get a virgin P28 and send that one. Hondata doesn't charge that much,(its kinda late, and I forgot what they quoted me) 
and they told me it would be about a week. I bought my P28 off of Ebay for about 135 shipped. They are all over the place.
and they told me it would be about a week. I bought my P28 off of Ebay for about 135 shipped. They are all over the place.
02-17-2005, 01:56 PM
#4
Honda-Tech Member
Re: Hondata s200 socketing questions (98vsmferio)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98vsmferio »</TD></TR><TR><TD CLASS="quote">Ok...I have a p28 ecu with a mugen chip in it (socketed in). I bought an s200 model w/ datalogging and I am going to get it all tuned up by church auto testing up in torrance and he told me that he doesnt prepare the ecu.
What do I have to do to get my ecu ready for hondata tuning?? I know i have to desolder the old chip out and socket in the new one from hondata...right?? </TD></TR></TABLE>
If it's allready got a socket installed, just pull out the chip and install your new one.
What do I have to do to get my ecu ready for hondata tuning?? I know i have to desolder the old chip out and socket in the new one from hondata...right?? </TD></TR></TABLE>
If it's allready got a socket installed, just pull out the chip and install your new one.
Trending Topics
02-27-2005, 05:54 AM
#10
Member
Join Date: Nov 2002
Location: Far Far East Coast
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
go here they have a directory full of tunner that can help you tune and socket your ecu.
http://www.ecimulti.org/uberda...ard=6
http://www.ecimulti.org/uberda...ard=6
02-27-2005, 12:21 PM
#11
Join Date: Aug 2004
Location: lost...
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2lua)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2lua »</TD></TR><TR><TD CLASS="quote">go here they have a directory full of tunner that can help you tune and socket your ecu.
http://www.ecimulti.org/uberda...ard=6</TD></TR></TABLE>
there's nothing in the link.
http://www.ecimulti.org/uberda...ard=6</TD></TR></TABLE>
there's nothing in the link.
Thread
Thread Starter
Forum
Replies
Last Post
thirsk66
Honda Prelude
7
02-02-2015 10:41 AM
