spreng87

Alright you guys don't laugh but I just recently purchased a decent 1994 Honda Civic 3dr VX. Everything is fairly stock except for the gay altezza tail lights. I've searched the forum for my d15z1 motor, and i found little to no luck with it.

My question is what are my gains if I swapped a d16z6 head onto my d15 block?
Do I have to deal with any wiring issues? I know I have to get a p28 ECU. but what about the engine wiring?

Also what other gains will I get if I swapped for a d16z6 tranny also? I'm looking for good gains.

What other mods can I do to make it a good streetable car?

Sleepy_Red_hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spreng87 &raquo;</TD></TR><TR><TD CLASS="quote">Alright you guys don't laugh but I just recently purchased a decent 1994 Honda Civic 3dr VX. </TD></TR></TABLE>

Whoooooooooray! VTEC-E! (the E means you ALMOST have real VTEC, its like a training thing)

im just kidding, i have a VX too, gona be a civic GS-R pretty soon.

handa

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spreng87 &raquo;</TD></TR><TR><TD CLASS="quote">
What other mods can I do to make it a good streetable car?
</TD></TR></TABLE>

I'd swap a B-series motor in there. If not, D16z6 full swap is fair. I don't see any use swapping any other vtec head on the D15. That's just me.

FalkenSiR

Any B swap will be relatively easy, streetable and reliable. Go with that.

jay_cue

if you search, there's someone on here that's running a d15z1 turbo'd. not much power, but its turbo'd i guess.

JDM-EJ1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whal3_p3nis &raquo;</TD></TR><TR><TD CLASS="quote">if you search, there's someone on here that's running a d15z1 turbo'd. not much power, but its turbo'd i guess.</TD></TR></TABLE>

lol. Why go D series when you can go B?

JDM-EJ1

I would also suggest an exhaust setup, I would recommend Apexi and Greddy, also a header/intake. And maybe even a new camshaft/cam gear to boot.

B-twentyVTEC

congrats...

spreng87

I'm wanting to do a B series swap now!! since you guys convinced me somwhat. Well I've been wanting to just wanted to see what can I get out of that VTEC-E Engine.

What will I need to do a Bseries swap into my EG? Since it's a VX will I have to do any wiring? Forgot! I'm getting a b18a/b swap with GSR/SI hydro tranny. I've been reading that it's somewhat of a direct bolt on if I use DC motor mounts. I might go with the jim fab motor mounts. are they good?