Help using PR4 IM for swap in EG
#1
Member
Thread Starter
Join Date: Jun 2005
Location: 49.4900N 96.8833W
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Help using PR4 IM for swap in EG
Please help me with this if you can. It's not hard really, I'm just a dumbass when it comes to all of the vacuum lines and ****. Just trying to get more views cuz the hybrid forum moves really slow...
https://honda-tech.com/zerothread?id=1429477
Please post anything you have to say in the other thread so I can keep it all together. A bump or two here would be appreciated though
https://honda-tech.com/zerothread?id=1429477
Please post anything you have to say in the other thread so I can keep it all together. A bump or two here would be appreciated though
#4
Honda-Tech Member
Join Date: Jul 2005
Location: nashville/fresno, tn/ca, Cambodia
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help using PR4 IM for swap in EG (transpar_nt)
i got a b18a in mine but mine is obd1 yours look like 90-91 obd0 mine was easy hookup with wires
Modified by jdmboi86 at 11:43 AM 11/12/2005
Modified by jdmboi86 at 11:43 AM 11/12/2005
Thread
Thread Starter
Forum
Replies
Last Post