hatchbackhonda

here is the problem i am running a automatic harness on my five speed ek and i need to wire up the reverse lights

i know i need to run the wires from the tranny switch to the ecu i think i am lost any input would help

hatchbackhonda

bump casue my car needs to be inspected by tomorrow and i still cannot figure out these damn reverse lights

EGRhatch

what are you lost on, that would help... do you not knwo which sopt on the ecu it plugs in, do you not knwo where the reverse switch is on your tranny?? what damnit what!!??

hatchbackhonda

i know where the reverse light switch is on the transmission i know all of that but what i am stumped on is when u are running a automatic harness in a orignal 5speed car where do i pin the ecu what is the pin numbers i need to run them too or if that is even what i need to do the wires on the tranny are green with a black stripe both of them where do i pin them too

hatchbackhonda

what is the proper pin location on both of them

hatchbackhonda

car is a 96 ek by the way

hatchbackhonda

c-mon honda-tech i know someone has to know the answer to this

hatchbackhonda

bumpity bump

hatchbackhonda

to the top tippy