header ?
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
header ?
After no response in the welding/fabrication forum, I thought I'd try my luck here.
I recently acquired a DC 4-1 stainless header in ok shape but it does have the usual dents on the bottom 2 pipes from where the previous owner was riding extra dumped(1 of which is severe and I'm almost positive will affect the flow). I was wondering if there was a way to fix it without cutting up the header, more than what I'll already be having done to it(2.5" collector mod).
I recently acquired a DC 4-1 stainless header in ok shape but it does have the usual dents on the bottom 2 pipes from where the previous owner was riding extra dumped(1 of which is severe and I'm almost positive will affect the flow). I was wondering if there was a way to fix it without cutting up the header, more than what I'll already be having done to it(2.5" collector mod).
Thread
Thread Starter
Forum
Replies
Last Post