Head Gaskets
#1
Thread Starter
Join Date: Dec 2002
Location: Miami, Fl, USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Head Gaskets
Hello... I did a search on this site to see if you brought up a way to bring up a compression of a D series engine and there were only for B.. now...
I have a 2000 Civic EX D16Y8, I was supposedly going turbo on this car so I had the comp dropped to 8.5:1 with a Mr.Gasket... Now I sold the turbo kit and I want to bring my Comp a bit higher then stock? something like 9.8:1 or something like that.. reason is i have a ported/polished head with 5 angle valve job.. and i know that likes the higher compression... is there any gasket out there that is made for the D-Series engine to do this? I know Toda does it for the B-Series..
Thanks..
I have a 2000 Civic EX D16Y8, I was supposedly going turbo on this car so I had the comp dropped to 8.5:1 with a Mr.Gasket... Now I sold the turbo kit and I want to bring my Comp a bit higher then stock? something like 9.8:1 or something like that.. reason is i have a ported/polished head with 5 angle valve job.. and i know that likes the higher compression... is there any gasket out there that is made for the D-Series engine to do this? I know Toda does it for the B-Series..
Thanks..
#3
Honda-Tech Member
Join Date: Nov 2002
Location: Eugene, Portland
Posts: 2,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: Head Gaskets (civicex2g)
try asking in the d series forum. http://pub143.ezboard.com/bhondadseries
Thread
Thread Starter
Forum
Replies
Last Post
djsgtrip
Honda CRX / EF Civic (1988 - 1991)
1
03-21-2007 07:15 PM
2point3h22lude
Honda Civic / Del Sol (1992 - 2000)
17
06-09-2005 03:47 PM