Hondasaurs

I got more pics, they just need to be scanned.

lazy bum shaughn

Terrific!

kmf0211

Fast?

jeiden

what kind of mounts did u use and how much?

Black93DelSolSi

let us know how it handles with the extra weight up front.

does it dive through turns or what?

wantmorepower

Hondasaurs

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jeiden &raquo;</TD></TR><TR><TD CLASS="quote">what kind of mounts did u use and how much?</TD></TR></TABLE>

HCP off Ebay for $250 shipped

Hondasaurs

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black93DelSolSi &raquo;</TD></TR><TR><TD CLASS="quote">let us know how it handles with the extra weight up front.

does it dive through turns or what?</TD></TR></TABLE>

We have not driven it yet. The fan hits the bleeder for the clutch. Were just waiting to get that fixed.

soopafly828

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ZC_CRX &raquo;</TD></TR><TR><TD CLASS="quote">

We have not driven it yet. The fan hits the bleeder for the clutch. Were just waiting to get that fixed.</TD></TR></TABLE>

get a front mount fan...or a braided line

UpstateCivic

Hmmm, front mount fan, that might work. Where'd you get yours? I was just gonna go with the dual core rad. and a slim fan, but this could be better.

t0p_sh0tta

What are the 2 lines coming out of the valve cover?

soopafly828

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UpstateCivic &raquo;</TD></TR><TR><TD CLASS="quote">Hmmm, front mount fan, that might work. Where'd you get yours? I was just gonna go with the dual core rad. and a slim fan, but this could be better.</TD></TR></TABLE>

it's a hayden fan, you can get them at any auto parts store. that is an old picture, i now have a dual core radiator. if you need a new radiator get it here because it's cheap, its all metal, its dual core and shipping is free and its next day in most area of the US http://www.radiatorbarn.com/s7...=1.6L

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t0p_sh0tta &raquo;</TD></TR><TR><TD CLASS="quote">What are the 2 lines coming out of the valve cover?
</TD></TR></TABLE>

those are oil lines for my catch can

HaRrYbOy

how's the quality of those mounts? how are they holding up?

robbieshonda

i like to watch the h22a turbo race

COMplex.

what radiator hoses are you using?

del sol lower? integra ls upper?

Turbo Laser

how much did the swap run ya?

heiyu

you can trim the rubber mount on top of the radiator to make it look like a C instead of a O. That lets you move the radiator up just a bit and it wont hit.

Hondasaurs

It cost my buddie just around $2200 with the mounts and axels.

IS3Fifty

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondasaurs &raquo;</TD></TR><TR><TD CLASS="quote">

We have not driven it yet. The fan hits the bleeder for the clutch. Were just waiting to get that fixed.</TD></TR></TABLE>

Im having the same problem with my b18 in an eg hatch.

shauniewalnuts

im jealous.. good ****

Archidictus

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TODAeg6 &raquo;</TD></TR><TR><TD CLASS="quote">Im having the same problem with my b18 in an eg hatch.</TD></TR></TABLE>

Then you did something terrifically wrong.

976

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Si.Hatch.92 &raquo;</TD></TR><TR><TD CLASS="quote">Fast?</TD></TR></TABLE>

Slow?

Jdm93civic

torquey?

976

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jdm93civic &raquo;</TD></TR><TR><TD CLASS="quote">torquey?</TD></TR></TABLE>

Haha!

Rob!

a friend of mine has it in his eg coupe...**** rips....