h22 and h23 tb on b series heheheheheeh
04-02-2003, 01:01 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: kent, WA, USA
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
h22 and h23 tb on b series heheheheheeh
just to let u know that the h23 and h22 tb fit a b series manifold i just put a h23 ihad on my car and there the same size as a type r minus 1 mm
04-03-2003, 12:17 PM
#5
Join Date: Apr 2003
Location: Phoenix, AZ and Humboldt County, CA, USA, USA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: h22 and h23 tb on b series heheheheheeh (racerboyb18c1)
Open headers don't usually help naturally aspirated hondas! try putting some exhaust on there for a little back pressure and watch your ets drop dude
hoof
arted
hoof
arted
04-06-2003, 12:18 AM
#6
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: kent, WA, USA
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
Re: h22 and h23 tb on b series heheheheheeh (brodsterH22)
i ran a 14.1 et with my 5 zigen cat back with a test pipe
and thats the best run i could get then the first ran i did with the open header i ran a 13.7 and my trap speed was 104 instead of 99 so i donno what it is it just runs better that way maybe cus its the header
hmm i go by what works not what people say
and thats the best run i could get then the first ran i did with the open header i ran a 13.7 and my trap speed was 104 instead of 99 so i donno what it is it just runs better that way maybe cus its the header
hmm i go by what works not what people say
Thread
Thread Starter
Forum
Replies
Last Post
