h series pulley on a b series crank shaft?
#1
h series pulley on a b series crank shaft?
hey guys, really quick. i'm in the process of my swap and i need to cough up a crank pulley. I have a h series pulley available to use and was wondering if anyone has attempted this. AKA Pulley from the h series on the ls crank. thanks
#5
Re: h series pulley on a b series crank shaft?
Thanks marc, and please keep the peanut gallery quiet. I was across town at a buddies shop and was offered a free part. Just curious if I should have taken it. Upon closer inspection I realized it would not work. BTW you call it half assing, I call it a forced swap under almost non-exsistant budget. Not all of us are rich......
Last edited by 93 hatchguy; 02-17-2012 at 08:18 PM.
Trending Topics
#9
O.G. triple O.G.
Re: h series pulley on a b series crank shaft?
Thanks marc, and please keep the peanut gallery quiet. I was across town at a buddies shop and was offered a free part. Just curious if I should have taken it. Upon closer inspection I realized it would not work. BTW you call it half assing, I call it a forced swap under almost non-exsistant budget. Not all of us are rich......
#10
Re: h series pulley on a b series crank shaft?
My bad, i thought the point of the site was to trade useful tech info, not blast people who are doing all of thier own mechanical work and had some questions. As momma always said " If you can't add something useful to the conversation, then MYOB.
#11
O.G. triple O.G.
Re: h series pulley on a b series crank shaft?
I'm not trying to be an *** or anything. It's just getting lame to see all these "new" members ask the same damn questions over and over and over again. Seriously, if people are too damn lazy to research the information they need, what's the point of working on cars. You have to learn how to crawl before you RUN.
#12
Re: h series pulley on a b series crank shaft?
I feel ya, and honestly I couldn't find anything on it quick, so I made a thread.. I don't know a lot about swaps, other than the 4, d series swaps and a 5 speed conversion I have done personally. Just never swapped d/b. Hell before I got on HT, I'd never seen a H2B conversion. Got me thinking about a H23 my boy has sitting in his shop. I always appreciate help in any form, even if it is just answering a stupid question. Maybe someone else will read this thread and not have to ask.
#13
O.G. triple O.G.
Re: h series pulley on a b series crank shaft?
No problem. Like grumblemarc mentioned, if members make posts that had some thought behind the question, other members don't mind to lend a hand with advices/suggestions....including myself.
Thread
Thread Starter
Forum
Replies
Last Post