H&R race springs on my 98 EK
#1
Thread Starter
Join Date: Dec 2003
Location: Hillsboro, OR
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
H&R race springs on my 98 EK
I've had my H&R race / illumina combo for about a year now and my car just doesnt have the correct stance I want. It looks, on level ground, that the back is actually lower than the front. There is like a 1.5 finger gap in the front, while the back is about 1 finger.
Now, i recently read on H&R's site that on 96-00 civics with race springs you can cut the bumpstops for an additional .5 inch lower front and rear.
My question is.....
Should I cut the front bumps and leave that back, because that should ( by what they are saying) even it out and give it the ride im looking for.
I searched on here, archived and recent, and found others asking this and no one gave a difinitive answer. Patrickgsr from like a year ago said it would do nothing by cutting them, but I would like more feedback before dropping the idea (pun int), or cutting the bumps.
Thank you
Now, i recently read on H&R's site that on 96-00 civics with race springs you can cut the bumpstops for an additional .5 inch lower front and rear.
My question is.....
Should I cut the front bumps and leave that back, because that should ( by what they are saying) even it out and give it the ride im looking for.
I searched on here, archived and recent, and found others asking this and no one gave a difinitive answer. Patrickgsr from like a year ago said it would do nothing by cutting them, but I would like more feedback before dropping the idea (pun int), or cutting the bumps.
Thank you
#3
Thread Starter
Join Date: Dec 2003
Location: Hillsboro, OR
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ekb16)
Nah the ride is amazing still. The illuminas were purchased at the same time, about a year ago. Ive only put about 5k miles on the car since them. Ive always had great exp with illuminas.
Thread
Thread Starter
Forum
Replies
Last Post