First Dyno numbers !!! d16z6 turbo
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Wilmington, De, usa
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
First Dyno numbers !!! d16z6 turbo
I am posting this for my buddy! We took his Eg to a shop around here that has a dyno jet. The first run was more than we expected, then he started to do some A/F tuning and ended up with 236whp with 176 torque and another at 235whp with 173 torque!! Not too shabby for a D series !!
Let me know what you guys thing
Let me know what you guys thing
#4
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Wilmington, De, usa
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (sleeperx)
for some reason the picture isn't loading
here is the link to the dyno results
http://www.we-todd-did-racing....D.jpg
here is the link to the dyno results
http://www.we-todd-did-racing....D.jpg
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Wilmington, De, usa
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (sleeperx)
D16z6 built, eagle rods, SRP pistons, Precision turbo T3/T04e 50 trim @ 9.5 lbs, turbonetics manifold, 3" dp, then to 2 1/2" crush bent exhaust ( that is the next thing to get changed) fully built valve train, tial WG, AEM ecu.
Hope this gives you guys alittle better idea
Hope this gives you guys alittle better idea
#11
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Wilmington, De, usa
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (Hehehe I just)
Oh yeah and port and polished head, not sure how much money, to a crazy amount, but didn't go cheap on anything! Gotta do it right the first time
#13
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Wilmington, De, usa
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (jazz215)
Thanks !! Hopefully the numbers will be even better once he gets the map sensor that can deal with more than 10lbs of boost, then we can start to really crank things up !!!
#14
Honda-Tech Member
Re: First Dyno numbers !!! d16z6 turbo (sleeperx)
Sounds purdy good for a D @ 9 PSI. Going with a 2 or 3 bar MAP? What is he tuning with? AEM ECU? Are you talking about the EMS???
#18
Honda-Tech Member
Join Date: Aug 2001
Location: The Emerald City, USA
Posts: 3,025
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (blackeg)
<--- Tears fall from eyes reading those numbers.
I wish I still had my EH/Z6/Turbo.
Keeping the SOHC alive though with my new F22A.
I wish I still had my EH/Z6/Turbo.
Keeping the SOHC alive though with my new F22A.
#25
Honda-Tech Member
Join Date: Sep 2001
Location: Maine, middle of NO and WHERE, USA
Posts: 1,308
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Dyno numbers !!! d16z6 turbo (accurate)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accurate »</TD></TR><TR><TD CLASS="quote">single cammers have some potential after all! </TD></TR></TABLE>
but dammm that's a lot of money he spent.......
get a new map and crank it UP!!!!!!
but dammm that's a lot of money he spent.......
get a new map and crank it UP!!!!!!