ek stanley sidemarker installation...
04-15-2003, 02:28 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: S. Kali
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
ek stanley sidemarker installation...
did a search on this and got nothing...anyone know wat the dimension and measurement are of where to put the sidemarkers on the fender?...just making sure, i don't want no retarded looking sidemarkers
04-15-2003, 04:52 AM
#3
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: ek stanley sidemarker installation... (boostedcivicsir)
i know your is an ek but i have been told it is the same. take it for what its worth good luck...
04-15-2003, 06:02 AM
#4
Junior Member
Join Date: May 2002
Location: San Diego, Ca., United States
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek stanley sidemarker installation... (boostedcivicsir)
If that is the 92-95 then the ek is different. The center of the side marker is exactly centered w/ the wheel well axis's. If you were to draw a line out from the top and side of the wheel well the contact point is the center of the side marker. Sorry but I don't have a diagram.
04-15-2003, 07:39 AM
#5
Honda-Tech Member
Join Date: Feb 2002
Location: Cincinnati, OH
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek stanley sidemarker installation... (Takeoff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Takeoff »</TD></TR><TR><TD CLASS="quote">If that is the 92-95 then the ek is different. The center of the side marker is exactly centered w/ the wheel well axis's. If you were to draw a line out from the top and side of the wheel well the contact point is the center of the side marker. Sorry but I don't have a diagram.</TD></TR></TABLE>
I will see about getting a picture of my fender and work on a diagram for this. Good information, thank you.
I will see about getting a picture of my fender and work on a diagram for this. Good information, thank you.
Trending Topics
04-15-2003, 08:03 AM
#8
Honda-Tech Member
Join Date: Sep 2002
Location: 805, socal, USA
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek stanley sidemarker installation... (TURSpoonEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURSpoonEK »</TD></TR><TR><TD CLASS="quote">of all the topics on this subject almost everyone wants to know the cutout shape</TD></TR></TABLE>
you find that out on your own.
you fine tune the cutout on a peice of cardboard, then transfer the design onto the fender.
you find that out on your own.
you fine tune the cutout on a peice of cardboard, then transfer the design onto the fender.
Thread
Thread Starter
Forum
Replies
Last Post
