lyzer227

I was on here this passed week looking for a schematic to hook up my homies EK power folding mirrors. I wasn't able to fine anything for it on honda-tech (only the EG one.) Then i finally found a schematic on google. This is the one i found.


While my homie carlos was taking everything off to start hooking the mirrors up i noticed that the freakin schematic was all wrong. So I took several looks at the one i found and saw that the power and ground were switched up and the way u wire up the mirrors to the relay was backwards also the activition switch to fold the mirrors in the wrong spot. After talking about it for a second we figered it out and the mirrors work and fold in. This is the way I wired the mirrors. I had to draw the schematic so sorry for the crapy drawing and the shity phone pic.



When compared to the OG schematic you will notice that i did not add some of the wires they are not necessary to know about because they are already on the switch and the OG one had them in the wrong place anyway. So hopefully this helps out all the people out there that have the folding mirrors but dont know how to hook it up. Thanks for LOOKING

deschlong

iTrader: (8)

Cool. Here are links to the Helms schematics (in Spanish). I posted these on H-T a while ago - too bad you didn't find them.

lyzer227

LOL u know what I did find this link but I can't read spanish that good and it also looked harder to wire up that way for me haha. I just wanted to give people a simple way of wiring them. Cuz there r alot of people like me who think it is hard and that don't know Spanish or every little Spanish

lyzer227

bump