zeegee84

Fellows i am struggling to get hold of the pinout details of the connectors as circled below. Appreciate your help

Left tower connector C101 C102 C103
Right tower connector C124 and C126

JRCivic1

You cannot use an OBD-1 engine harness on an OBD-2 chassis.

zeegee84

Its possible if i can only get pintout i can match to the existing wiring using opposite end plugs

hondamark35

it's much less work to get the OBD2 harness to work with the OBD1 engine.

pick up something like this from eBay. it has everything you need and more. There is a supplemental manual for electrical troubleshooting if you can find one of those too. also if you can find a similar deal on the '00 model year FSM it would be well worth the money to pick up both.

There's too much info in there to piece-meal it out to you over the internet. better to just have the hard copies on your shelf.

JRCivic1

ANYTHING is possible... but this is really the hard way to do this. Why do you want to make this difficult ?

zeegee84

I have the Raynes service manual and oem service manual both , but they are not serving any purpose to find the pinout details for connectors i need.