EG hatch Buildup questions?
01-14-2005, 05:29 AM
#1
Member
Thread Starter
Join Date: Jan 2005
Location: Biking and Beer, CT
Posts: 3,764
Likes: 0
Received 0 Likes
on
0 Posts
EG hatch Buildup questions?
hey guys,
I am getting a 1992 VX hatch to build up for the summer time. I have a 1990 mitsu eclipse AWD turbo with some mods. I need to sell that car before emissions time because of lack of cat and other things that would get you a failure just upon visual inspection in CT. The car is a friggen nightmare as most of you people know only buy a DSM if you are ready to get your hands real dirty.
Back to The Honda, the hatch i am getting is pretty much stripped to the bone and i was wondering if anyone had or knew of a writeup on the most basic engine install. Only what is absolutely needed to run the car. I have the motor and trans and i will eventually be going turbo but i am literally starting with no accessories in the engine bay and a bunch of boxes. I have seen many super-clean installs where you see about ten wires total. I was wondering if anyone had a writeup or some damn good advice before i get myself into a never ending project. I am going to automotive school so i have a decent amount of knowledge and experience.
Im not really afraid of the work i just don't want to get too wrapped up and never finish the project. Any info would be much appreciated thanks guys.
Sean
I am getting a 1992 VX hatch to build up for the summer time. I have a 1990 mitsu eclipse AWD turbo with some mods. I need to sell that car before emissions time because of lack of cat and other things that would get you a failure just upon visual inspection in CT. The car is a friggen nightmare as most of you people know only buy a DSM if you are ready to get your hands real dirty.
Back to The Honda, the hatch i am getting is pretty much stripped to the bone and i was wondering if anyone had or knew of a writeup on the most basic engine install. Only what is absolutely needed to run the car. I have the motor and trans and i will eventually be going turbo but i am literally starting with no accessories in the engine bay and a bunch of boxes. I have seen many super-clean installs where you see about ten wires total. I was wondering if anyone had a writeup or some damn good advice before i get myself into a never ending project. I am going to automotive school so i have a decent amount of knowledge and experience.
Im not really afraid of the work i just don't want to get too wrapped up and never finish the project. Any info would be much appreciated thanks guys.
Sean
01-14-2005, 06:55 AM
#3
Honda-Tech Member
Re: EG hatch Buildup questions? (EG_Black_Hatch)
Top right corner is the search function. just type "swap" or "DIY swap"...
you'll find something... goodluck
you'll find something... goodluck
Thread
Thread Starter
Forum
Replies
Last Post
eg_kiid
Honda Civic / Del Sol (1992 - 2000)
9
06-26-2009 11:15 AM
JohnnysEG
Southeast (Sales)
13
07-28-2008 11:30 AM
JohnnysEG
For Sale
5
07-17-2008 05:18 PM