eg coupe to jdm type r front end conversion
01-21-2005, 12:14 PM
#1
Thread Starter
Join Date: Jan 2005
Location: ca, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
eg coupe to jdm type r front end conversion
i was thinking about converting my eg coupe front end to a jdm teg front end. Any idea of how much work would be involved and about how much this shold cost me to convert (labor only). any input would be great. thanks
01-21-2005, 12:43 PM
#3
Join Date: Dec 2004
Location: home of 12 national championships, AL
Posts: 1,718
Likes: 0
Received 1 Like
on
1 Post
Re: eg coupe to jdm type r front end conversion (93blkej1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93blkej1 »</TD></TR><TR><TD CLASS="quote">a lot of time and money, its not worth it plus it looks like ***. put the money somewhere else.</TD></TR></TABLE>
01-21-2005, 12:44 PM
#4
Join Date: Jul 2002
Location: Phoenix, AZ
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Re: eg coupe to jdm type r front end conversion (xEYEDEAx)
Looks like ***? I think it looks hot and if you have the spare money to do it, then go for it.
inbeforetonsofjdmpics
inbeforetonsofjdmpics
01-21-2005, 12:47 PM
#5
Re: eg coupe to jdm type r front end conversion (xEYEDEAx)
it's not really that much work...
It's basically the same as replacing your:
hood
Rad. Support
Fenders
Bumper
headlights
turnlights
the work really comes in on the fenders...
the teg fenders won't mate to the coupe doors... you you need to section the back half of your stock fenders and mate them to the front half of the ITR fenders...
other than that it's essentially bolt up as far as I know...
anyone who know's different please feel free to correct me...
IMO it looks better than a JDM ITR does... I hate the rear-ends of integras.
It's basically the same as replacing your:
hood
Rad. Support
Fenders
Bumper
headlights
turnlights
the work really comes in on the fenders...
the teg fenders won't mate to the coupe doors... you you need to section the back half of your stock fenders and mate them to the front half of the ITR fenders...
other than that it's essentially bolt up as far as I know...
anyone who know's different please feel free to correct me...
IMO it looks better than a JDM ITR does... I hate the rear-ends of integras.
01-21-2005, 01:04 PM
#6
Honda-Tech Member
Join Date: Jan 2005
Location: MCB Camp Pendleton, CA
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Re: eg coupe to jdm type r front end conversion (xEYEDEAx)
i would do it to my ride.but im broke..well if you gonna do it let me have your head lights n turning lights 
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
disgsrguy
Honda Civic / Del Sol (1992 - 2000)
6
03-13-2007 09:50 AM
Vtec GSR95
Honda Civic / Del Sol (1992 - 2000)
16
12-12-2004 04:53 PM
